Messingplatte H62 — Brass sheet (metal copper foil) for metalworking Material: Brass H62 in thin sheet/foil form Thickness: 0.4 mm Length: 3000 mm (118.11 in) Width: 40 mm Key benefits Precise, uniform thickness (0.4 mm) for consistent shimming, spacers, and overlays where tight tolerances matter. Long single-strip length (3000 mm) reduces joints and seams, simplifying runs and repetitive cuts. Narrow 40 mm width provides ready-to-use strips for bending, folding, and routing into channels or grooves without excess waste. Brass H62 combines formability and mechanical stability suitable for metalworking applications that require both shaping and a durable finish. Supplied as a metal copper-coloured foil that is easy to cut, bend, and shape by hand or with standard sheet-metal tools. Function and compatibility Designed for metalworking tasks: forming, edging, trimming, shimming, and decorative applications. Compatible with common joining and finishing methods used on brass strip (mechanical fastening, soldering, and surface treatments) depending on process requirements. Thin-foil format works well in tight clearances and layered assemblies where rigid sheet metal would be unsuitable. Performance attributes Low-profile 0.4 mm thickness allows fine adjustments and minimal added bulk. Full-length strip (3000 mm) supports long runs or multiple smaller parts from a single piece. 40 mm width minimizes waste for strip-specific applications while enabling straightforward handling and processing. Typical applications Electrical and EMI projects: use as grounding or shielding strips and conductive pathways in enclosures and prototypes (where brass properties meet design requirements). Mechanical shims and spacers: precise 0.4 mm shims for alignment, gap control, and contact surfaces in assemblies and fixtures. Decorative and restoration work: trim, edge banding, instrument repair, or architectural accents that require a copper-coloured metallic finish and easy forming. Specifications (unchanged) Product name: Messingplatte H62 Material form: metal copper foil (brass sheet) Thickness: 0.4 mm Length: 3000 mm / 118.11 inches Width: 40 mm Order this Messingplatte H62 strip when you need a long, narrow brass foil with consistent thickness for precise metalworking, shimming, decorative trim, or conductive strip applications.