1100W Concrete Vibrator 220V Electric Cement Poker for Construction Site Bridge

84.00 CHF
+ 44.99 CHF Livraison

1100W Concrete Vibrator 220V Electric Cement Poker for Construction Site Bridge

  • Marque: Unbranded
Verkocht door:

1100W Concrete Vibrator 220V Electric Cement Poker for Construction Site Bridge

  • Marque: Unbranded

84.00 CHF

Économisez 35.00 CHF (29%)

Prix de vente recommandé

119.00 CHF
En stock
+ 44.99 CHF Livraison

Politique de retour sur 14 jours

Verkocht door:

84.00 CHF

Économisez 35.00 CHF (29%)

Prix de vente recommandé

119.00 CHF
En stock
+ 44.99 CHF Livraison

Politique de retour sur 14 jours

Modes de paiement:

Description

1100W Concrete Vibrator 220V Electric Cement Poker for Construction Site Bridge

Key Features ▶High-quality Material: The thickened aluminum shell and plastic electric machinery have high-pressure resistance and corrosion resistance, which can effectively prolong the service life of the product. ▶High-quality Motor: 1100W high-power motor adopts temperature-resistant pure copper enameled wire and all-copper winding, which is not only firm and stable, but also has a longer service life. The amazing vibration frequency of 160Hz can effectively remove bubbles and help concrete to set faster and more firmly. ▶Easy to Operate: The full wrap-around handle, side auxiliary handle, and the lightweight design of the body (17.2 lbs) are ideal for continuous use. At the same time, the lock button on the handle can make it work continuously without manual pressing and reduce the intensity of work. ▶Low Noise: The silent axle inside the product can effectively reduce noise and provide you with a quiet and comfortable working environment. ▶Fast Heat Dissipation: The heat dissipation holes at both sides and cast aluminum head can accelerate the heat dissipation of the motor and make the motor run smoothly and efficiently. ▶High Safety: The vibrator adopts double insulation, and the stator has reached the F-class insulation level through a special vacuum dip coating process, which can provide higher safety for your operation. ▶Easy to Carry: The detachable design and lightweight (17.2 lbs) of this vibrator make it easy to carry. You can easily take it anywhere you need to work. Details ●External Carbon Brush Holder: The external carbon brush design allows for easy and quick replacement of carbon brushes, making the maintenance of this product more convenient. ●Screw Joint: The shaft and the machine body are connected by a screw joint, which makes them more stable and not easy to loosen. ●Long Shaft: The 6.6 ft-long shaft is easy to use and can effectively expand your working range. It can be used for consolidating large-volume cement. Application It is applicable to consolidate cement and remove all the trapped air bubbles to give you the toughest cement, and is widely used in commercial concrete, bridges, port construction, large dams, hydroelectric power plants, transportation, water conservancy, port, mine and metallurgy, high-rise building foundation pouring piles, dense steel mesh concrete walls and large, medium and small construction projects, patching and other repair jobs, etc. Specification Material: Aluminum, Plastic, Copper Color: Red Process: Pouring and Vacuum Dip Coating Assembly Required: Yes Power: 1100W Plug Standard: EU Standard Voltage: 220V 60Hz Power Source: Corded-electric Item Package Quantity: ‎1 Power Cord Length: 2m/6.6ft Vibration Frequency: 160Hz Max. Swing: 0.55mm Gross Weight: 8.5kg/ 18.74 lbs Net Weight: 7.8kg/ 17.2 lbs Motor Size (L*W): 31.8*15.5cm/12.5*6.1in Handle Length: 11.8cm/4.6in Length of Vibration Rod: 2m/6.6ft Rod Head Size (φ*L): 3.5*45cm/1.37*17.7in Nut Height: 4cm/1.57in Package Size: 68*45*10cm/26.77*17.72*3.94 in Package Included 1 * Electric Concrete Vibrator 1 * Vibration Rod 1 * English Manual All Accessories for Installation Notes 1. After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the shaft to the ground. Please be sure to use the side of the rod head to knock the floor or the shell bar, or you can swing the head of the stick for a little while and it will start to vibrate. 2. When the concrete vibrator works, the concrete vibrator should be inserted into the concrete vertically or at an angle. After vibrating for a certain period of time, the concrete vibrator should be pumped up and down when vibrating. 3. After working continuously for 1-2 hours, the vibrating rod should stop for a while to prevent the machinery from heating up too much and damaging the machine parts. 4. After using it for a period of time, the vibrating rod should be checked to see if the threaded connection of the rod head is loose to prevent the mortar water from penetrating into the rod, causing the vibrating rod not to vibrate. 5. Products with electrical plugs are designed for use in the EU. Please check compatibility before purchasing.
  • Identifiant Fruugo: 373610951-809148977
  • EAN: 733835964260

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark

Livraison

Expédition dans les 24 heures

  • STANDARD: 44.99 CHF - Livraison entre lun. 29 juin 2026–lun. 06 juillet 2026

Expédition de Allemagne.

Retours

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles.

Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • CHENGDU KANGTEEN TECHNOLOGY CO., LTD.
  • CHENGDU KANGTEEN TECHNOLOGY CO., LTD.
  • 1ST FLOOR, NO. 88 ZHANGJIA LANE HUAYANG STREET, TIANFU NEW DISTRICT CHENGDU, SICHUAN PROVINCE, CHINA
  • CHENGDU
  • CHINA
  • 610000
  • [email protected]
  • 18215632326
  • http://www.kanten.cn/lianxiwomen.html

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • E-CrossStu GmbH
  • E-CrossStu GmbH
  • IT-E-CrossStu GmbH Felix-Dahn-Str 4,Stuttgart 70597 Germany
  • Stuttgart
  • Germany
  • 70597
  • [email protected]
  • -71191222020