A DC-DC converter that steps a 48V input down to a regulated 24V output, supplying up to 10A and a maximum of 240W. Key benefits - Converts higher-voltage 48V sources to the common 24V bus so existing 24V equipment can be used without rewiring or new batteries. - Delivers a reliable 24V supply for devices that require up to 10A, eliminating the risk of underpowering sensitive loads. - Single-line technical limits make system design simple: know the input is 48V and the output capacity is 24V at 10A (240W). Important specifications - Output current: 10A - Output power: 240W - Input voltage: 48V - Output voltage: 24V Function and compatibility - Function: DC-DC step-down conversion from 48V to 24V. - Compatible with any 48V DC source capable of supplying the converter’s input current and with 24V DC devices that require up to 10A. - Suitable for integration into power systems where a fixed, rated 24V supply is needed from an existing 48V bus. Performance and practical use - Provides a defined power envelope (24V × 10A = 240W) so components and loads can be selected to match the converter’s rating. - Use in environments where a stable 24V output is required from a higher-voltage battery or supply. Typical applications - Renewable energy systems: power 24V inverters, charge controllers, or controllers from a 48V battery bank. - Industrial automation: run 24V control modules, sensors, or actuators from a 48V plant supply without additional power cabinets. - Lighting and electromechanical loads: supply 24V LED drivers, pumps, or small DC motors that together do not exceed 10A. Installation note - Ensure the 48V source can provide the input current necessary for the intended 24V load, and keep the connected loads within the 10A/240W limit for reliable operation.