Product: Single-row tapered roller bearing 32008 X P5 Key benefits - Precise fit and smooth operation: single-row tapered rollers control combined radial and axial loads for reliable performance in rotating assemblies. - Higher accuracy: the P5 designation indicates a higher precision tolerance for reduced vibration and improved running stability where tighter concentricity is required. - Easy replacement and assembly: consists of two separable parts (taper and cup), allowing straightforward installation, inspection, and replacement without disturbing the mating housing or shaft. - Clear identification and compatibility: available under designations 32008 X and 32008X/Q, making ordering and cross-referencing simple. Specifications and important attributes - Model: 32008 X P5 - Alternate designations: 32008 X, 32008X/Q - Type: single-row tapered roller bearing (separable cone and cup) - Dimensions: 40 x 68 x 19 (shaft bore Ø 40 mm, outer diameter 68 mm, width 19 mm) - Production date/code: 2007108 - Function: supports combined radial and axial loads; taper and cup configuration permits preload and alignment control Performance and suitability - Designed for applications that need controlled axial thrust capacity together with radial load support. - P5 tolerance class supports applications requiring better-than-standard running accuracy and repeatability. - Separable design allows correct preload adjustment, improving longevity and predictable performance under varying loads. Compatibility and installation notes - Use where assemblies accept a 40 x 68 x 19 single-row tapered roller bearing and where the 32008 series form factor is specified. - Install the taper (cone) and cup together, set required axial clearance or preload per equipment manufacturer’s instructions, and verify correct lubrication. - Confirm designation (32008 X or 32008X/Q) to match replacement parts and housing fits. Practical use scenarios - Automotive hubs and steering knuckles where the bearing must carry both radial and axial loads while maintaining wheel alignment. - Industrial gearboxes and reductions where precise shaft positioning and load sharing are required and higher tolerance (P5) improves performance. - Light to medium-duty rotating machinery or agricultural equipment that requires an easily serviceable tapered bearing with separable cone and cup. Ordering and identification - Specify model 32008 X P5 and/or alternate designation 32008X/Q when ordering to ensure correct fit. - Include production date/code 2007108 if traceability or batch matching is required.