Polyurethane Plate — 500 x 500 mm (20 x 20 inches), assorted thicknesses, 1 Pack Key benefits — why you need this product Superior strength: poly urethane offers significantly higher tensile strength, tear resistance and load capacity than rubber, so it stands up to heavy loads and rough use. Better impact and flex performance at higher hardness: for hard grades, impact resistance and bending strength exceed those of many plastics, reducing risk of cracking or permanent deformation. Effective vibration control: excellent vibration damping absorbs shocks and reduces transmitted vibration, improving equipment life and operator comfort. Oil resistance: the highly polar polyurethane formulation has low affinity for non‑polar mineral oils and is minimally affected by fuel oil and machine oil, making it suitable for oily environments. Features and specifications Material: Polyurethane Dimensions: 500 x 500 mm (20 x 20 inches) Thickness options: 1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 15 mm, 20 mm, 25 mm, 30 mm Pack quantity: 1 Pack Functions: load bearing, wear pad, shock and vibration damping, buffer, spacer, mould component substitute for rubber/springs Performance and compatibility Mechanical performance: higher tensile and tear strength than rubber; improved impact and flex resistance over many plastics at equivalent hardness. Chemical compatibility: low susceptibility to attack by common mineral oils, machine oils and fuels; suitable for use where occasional oil exposure occurs. Usability: can be cut, drilled or shaped to fit mounting plates, mould inserts or anti‑vibration pads; works as a direct replacement for rubber or springs in many mould making and vibration control applications. Typical applications (practical scenarios) Mould making: replace rubber inserts or small springs with polyurethane plates to provide consistent buffering, longer wear life and predictable springback in tooling and mould fixtures. Machinery vibration isolation: use as anti‑vibration pads under compressors, pumps, motors or presses to reduce vibration transmission to floors and frames while carrying heavy loads. Wear and spacer pads: install as wear strips, buffer pads or spacers in conveyor systems, heavy equipment or machine assemblies where oil exposure and abrasion resistance are concerns. Ordering and selection tips Choose thickness based on load and deflection needs: thinner sheets for light damping or shims; thicker sheets for heavy load support and impact absorption. Single pack contains one 500 x 500 mm plate. Multiple thicknesses available to suit application requirements. If cutting or machining is required, use standard tooling for polyurethane and verify final dimensions before installation. Safety and handling Handle as an engineered polymer sheet; standard shop safety (gloves, eye protection) recommended during cutting or machining. Store flat in a dry area away from direct heat sources to maintain dimensional stability. This polyurethane plate provides a durable, oil‑resistant solution for load bearing, vibration damping and mould making needs while offering greater strength than rubber and improved impact performance over many plastics.