Features Copper Wire Rotor: Strong magnetic induction and good electrical conductivity ensure high efficiency and low loss, enhancing motor performance. Low Noise: Enjoy a quiet working environment with minimal motor running noise, eliminating distractions and discomfort during operation. Sturdy Casing: Resistant to high temperature and wear, with strong bearing capacity for enhanced safety and durability. High Efficiency: Precision winding technology boosts power by 30%, delivering increased performance and productivity. Stable Performance: Wear and impact resistant with fast heat dissipation, ensuring stable efficiency and minimal environmental impact. Specification: Item Type: Brushed DC Motor Material: Copper aluminium alloy Rated Voltage: 24V Rated Power: 11W Rated Current: 1.78A Scope of Application: Smart home, machinery, medical equipment, automatic equipment, CNC machine tools, high accuracy measuring instruments, etc. Package List: 1 x Brushed DC Motor Note: betweendiv>1. When you use the motor, there should be no binding things, such as the adhesive should not be injected into the bearing through the rotating bearing, which will hinder the operation of the motor.between/div>betweendiv>2. The rotation of the shaft may have the opposite effect on the life of the motor. In order to prolong the life, please check whether your load is in accordance with the regulations, not overloaded or hanging on the shaft end with objects that hinder the rotation.between/div>betweendiv>3. It is made into an eccentric heavy radiation load, which is harmful to the life of the motor.between/div>betweendiv>4. Do not store in high temperature or extreme humidity, and do not place in corrosive gas, which will reduce the motor effect.between/div>betweendiv>5. Do not run the motor in the surrounding high temperature and humidity.between/div>betweendiv>6. When soldering is required on the motor terminals of the positive and negative poles of the power supply, the temperature of the soldering iron is 340°C ± 40°C, and the heating time is within 3 seconds, and the plastic cannot be deformed. During the work, let the solder point into the motor or break the end of the wire, which will cause Motor function declines.between/div>betweendiv>7. Do not let the motor shaft get stuck. When power is introduced, the motor will overheat in a short time and its accessories will be burned.between/div>betweendiv>8. Due to the lack of skills of the staff, the quality of the motor cannot be guaranteed when the motor encounters the things mentioned i Package List 1 x Brushed DC Motor