Welder Heating Plate Heating Soldering Plate Welder Hot Preheating Chip Welding Station 20V Mini Smart Thermostat for DIY Laboratory Repair DSKQ7

24.95 CHF
la livraison GRATUITE

Welder Heating Plate Heating Soldering Plate Welder Hot Preheating Chip Welding Station 20V Mini Smart Thermostat for DIY Laboratory Repair DSKQ7

  • Marque: Unbranded
Verkocht door:

Welder Heating Plate Heating Soldering Plate Welder Hot Preheating Chip Welding Station 20V Mini Smart Thermostat for DIY Laboratory Repair DSKQ7

  • Marque: Unbranded

24.95 CHF

Économisez 11.00 CHF (30%)

Prix de vente recommandé

35.95 CHF
En stock
la livraison GRATUITE

Politique de retour sur 14 jours

Verkocht door:

24.95 CHF

Économisez 11.00 CHF (30%)

Prix de vente recommandé

35.95 CHF
En stock
la livraison GRATUITE

Politique de retour sur 14 jours

Modes de paiement:

Description

Welder Heating Plate Heating Soldering Plate Welder Hot Preheating Chip Welding Station 20V Mini Smart Thermostat for DIY Laboratory Repair DSKQ7

Features DISPLAY AND CONTROL: Welder hot plate with organic light emitting diode screen, support temperature control. MINI THERMOSTAT: Smart thermostatic heating table in super mini format with 3D printed shell without overlay. FUNCTIONS AND EFFECTS: The heating solder plate can eliminate redundant functions, keep sufficient efficient heating area, which greatly saves energy consumption and heating time. Fast & Efficient The chip soldering station supports USB Type C interface and PD protocol for faster heating speed. LOW LOSS: The application scope of the welding hot plate is wide, and the operating parts are preheated centrally to reduce damage to neighboring parts. Specification: Item Type: Solder Hot Plate Input interface: Type C Power supply: PD65W 20V 3.25A (PD65W recommended) Temperature range: 0℃~350℃(lowest temperature is room temperature, can only be increased, can not be reduced) Shell: 3D printed shell, no overlay. Product size (L x W x H): approx. 5.5 x 5.5 x 3.5 cm/2.2 x 2.2 x 1.4 inches. Package List: 1 x Soldering Hot Plate Note: 1. The recommended temperature should not exceed 250 ° C.2. The power supply requires a charger that supports PD protocol, the voltage is 20V 3.25A, and the voltage that can support the PD protocol is 20V in theory. Package List 1 x Heating Soldering Plate
  • Identifiant Fruugo: 400216781-851721092
  • EAN: 9301540501868

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
Ingrédients: As shown in the figure

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre jeu. 08 janvier 2026–mer. 14 janvier 2026 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Shenzhenshi Desheng Wangluo Keji Youxian Gongsi
  • Shenzhenshi Desheng Wangluo Keji Youxian Gongsi
  • NO,606-23-220,MeinianGuojiGuangChangZhaoshangJiedaoNanHaidadao yixiShenzhenGuangdong
  • Shenzhen
  • CN
  • 518000
  • GoodLuck856@163.com
  • 8613164761511

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • SINO-SEAR GmbH
  • SINO-SEAR GmbH
  • Feuerbachstrasse 11, 14471 Potsdam, Germany
  • Potsdam
  • DE
  • 14471
  • info@sino-sear.com
  • 4933195130908