Universe Starry Wonders 3D Vinyl Broken Wall Art Mural Stickers for Home Decorations Galaxy Stars Sky Landscape Poster Wallpaper Landscape sticker Broken-wall style Material: White environmentally friendly PVC film Sizes It has about 56.0cm /22.0in in width and 38cm /15.0in in height. After pasted, the wall stickers has the finished sizes as the above. Here might have a size deviation of 1-2cm, but it will not have any bad effects on the pasted effect. Here does not show the actual out-factory size of the sticker. If mind, please be cautious to buy! The original size of the wall sticker received, it has 60*45cm /23.6*17.7in (width*height), as the below picture Our Packing (Default) For medium /small size of the wall stickers, it is rolled up with a hard foam stick, and then packed into Opp bag. Remark: This foam stick has about 5cm in diameter, and not longer 52cm in length. Considering the value of the goods itself, we have adopted this simple packaging method to avoid excess packaging, normally, it turned out to be safe in transit. Please Note: Since the PVC /vinyl film has elasticity, can be stretched or shrank, but the backing paper cannot. When the wall stickers was took out and unfolded, it might happen wrinkle. Don't worry! this hasn't a bad effect on the pasting, when installing, just use a hard card to press flatten. Warm Tip: When receiving the packages, if the stickers is damaged in transit, please raise a dispute attaching some real photos to ask a refund, the reason of dispute is "Product arrived damaged", not "xx are not as described" or "Defective". And, if just because of this, it is hopeful not to leave us a negative feedback (below 3 stars) Like this, as seller, we can do a claim on the logistics company. And, it isn't required to return the goods to the seller. Thanks a lot for your understand and support! Scope of Applicable Any smooth flat surface in which can be pasted; Such as 1- painted wall, 2- wallpaper, 3- ceramic tile, 4- plastic goods, 5- wood goods, 6- metal goods, 7- glass goods, and etc; Excluded 1- off powder or peeled wall, 2- the pits or cracked metope, and 3- uneven surface. Please see the below pictures shown, only for reference. FAQ Q: What features of the material of wall stickers? A: Translucent or white environmentally friendly PVC material; Waterproof and cleanable (use a wet cloth with clean water to clean); Removable, if pasting on a wrong place, remove it and pasted again. After removal, no smudges will be left behind; Can be applied onto any suitable color surface, such as door, fridge, window and etc; If the worked surface is color or black, it is perfect to choose the white material; Translucent material has no any white edge left after applied onto the worked surface, the image looks like more lifelike; If have a special demand on the material, please leave a message. Q: Can the wall stickers be reused? A: Yes. But not recommended. Q: Size error and color difference? A: The actual size of the goods received may have an error of 1-3 MM. This is a normal phenomenon. The color difference may be caused by some reasons such as color reflection in the monitor, lighting, background & etc. The color is subject to the real goods received. If just not like the color of the real goods received, please don't leave a negative feedback of "Bad Quality". If mind, please be cautious to buy! Q: Why is it that the wall stickers attached will peel off automatically slowly soon after, is it a quality problem? A: The wall stickers are mass-produced and have passed factory inspected, so it is not normal for several pieces of wall stickers to be poorly attached. The possible influencing factors are as follows: 1/ Just coated walls with new paint, uneven wall surfaces, unclean surfaces (with dust or powder), wet wall surfaces; 2/ Low temperature environment. In a cold room, the adhesive might frozen, reduced the adhesion of wall stickers; 3/ The stickers didn't stick onto the wall surface tightly, leaving gaps. As the above, only for reference! Pasting Matters Needing Attention After received, please release it and keep flattening 1-2 days, until the stickers is restored flattening, and then paste, to avoid curling edge peeling; Make sure that the pasting surface must be smooth flat clean and dry; Before pasting, it is required to do testing on the surface that want to paste, to check over whether be applicable to paste this wall stickers; When pasting a large area decal, pasting onto the wall surface while peel off the decal slowly to start from the edge corners; If any bubbles, use a hard card to squeeze out, or a sharp small needle to puncture, and then press flat. As the above, only for reference!