22 x 58 mm Fast‑Acting (Quick‑Blow) Fuse — 10 A to 125 A Key benefits Rapid circuit protection: fast-acting (quick‑blow) design interrupts overcurrent quickly to limit damage to sensitive components and wiring. Wide rating range: available in 10 A, 16 A, 20 A, 25 A, 32 A, 40 A, 50 A, 63 A, 80 A, 100 A and 125 A to match a variety of circuit requirements. Standard form factor: 22 x 58 mm dimension ensures compatibility with fuse holders and panels designed for this common cylindrical size. Simple selection and replacement: clearly defined current ratings make it easy to choose the correct fuse for a specific circuit. Features and function Size: 22 x 58 mm cylindrical fuse suitable for applications that specify this standard dimension. Ratings: Offered in multiple nominal currents (10 A through 125 A) so you can select the appropriate protection level. Type: Fast‑acting (quick‑blow) fuse — designed to open quickly on overcurrent events rather than providing time delay. Compatibility and performance notes Fits fuse clips, holders and panels compatible with 22 x 58 mm cylindrical fuses. Use the specified current rating that matches the circuit protection requirement and system design. Fast‑acting fuses are intended for protecting sensitive electronic components and circuits where rapid interruption is required. Typical applications Industrial control panels and switchgear where a standard 22 x 58 mm quick‑blow fuse is specified for branch circuit protection. Electronic power supplies and control electronics that require fast interruption to prevent component damage from short circuits or sudden overcurrent. Equipment maintenance and field replacement — drop‑in replacements for devices originally equipped with 22 x 58 mm fast‑acting fuses. Selection and safety reminder Choose the ampere rating that corresponds to the circuit design and safety margins. Replacing a fuse with a higher rating can compromise protection; replacing with a lower rating may cause nuisance blowing. Install and replace fuses only with power disconnected and follow applicable safety procedures and local regulations.