Restore and re-tin soldering iron tips quickly and reliably with this resurrection salve designed for soldering tip maintenance. Key benefits Removes black oxide and tip "blackening" from soldering iron tips, restoring surface condition and solderability. Re-plating with solder improves heat transfer and makes soldering cleaner and faster. Simple, fast process you can repeat until the tip is properly tinned — no special tools required. What it does Cleans oxidized tip surfaces and deposits fresh solder on the tip to re-establish a tinned surface. Works with standard soldering iron tips and nozzles to extend usable life and improve joint quality. How to use 1. Wipe away the black oxide from the tip surface to remove visible blackening. 2. Dip or apply the soldering tip into the resurrection salve and wait a few seconds. 3. Clean the tip with a soldering sponge or copper wire wipe to remove excess residue. 4. Solder will plate onto the tip. Repeat steps 2–3 if the re-tinning effect is not yet sufficient. Practical applications Electronics repair and PCB work: restore tip performance for reliable, consistent solder joints. Production and rework stations: quickly re-tin tips during shifts to maintain throughput and quality. Hobbyists and makers: keep soldering irons ready for fine-detail soldering without replacing tips prematurely. Compatibility and performance Intended for use on soldering iron tips and nozzles. Produces an immediate re-tinning effect; repeat applications as needed for best results. Cleans and plates without requiring tip replacement, helping reduce downtime and consumable costs. Straightforward, effective maintenance for soldering tips — follow the steps above to restore solderability and improve soldering performance.