0.4x2M Water Transfer Printing Film Hydrographics Hydro Dipping Kit Snakeskin Design for DIY Decor

8.95 CHF
+ 11.49 CHF Livraison

0.4x2M Water Transfer Printing Film Hydrographics Hydro Dipping Kit Snakeskin Design for DIY Decor

  • Marque: Unbranded
Verkocht door:

0.4x2M Water Transfer Printing Film Hydrographics Hydro Dipping Kit Snakeskin Design for DIY Decor

  • Marque: Unbranded

8.95 CHF

Économisez 9.00 CHF (50%)

Prix de vente recommandé

17.95 CHF
En stock
+ 11.49 CHF Livraison
Verkocht door:

8.95 CHF

Économisez 9.00 CHF (50%)

Prix de vente recommandé

17.95 CHF
En stock
+ 11.49 CHF Livraison

Nous acceptons les modes de paiement suivants

Description

Application range: can be applied to the surface of the materails such as hardware(brass,iron,aluminum,copper,etc.),wood,plastic(ABS,PU,PP,PE,PVC,etc.),stone,ceramic,glass,etc. Applicable industries: autos, electronic products,household appliance,daily arts and crafts,indoor,footwear,sports apparatus,etc. Tensile properties, pattern is not easy deformation. Environment friendly , it will not bring pollution to the natural environment. Not easy to fade; waterproof ; enduring aesthetic appearance. Water transfer film , also called transfer printing, is a way to do the printing on the surface that is irregular, which overcomes the problem facing offset printing that can not reach the tongued and grooved face. Specification: colour:black Water Operation Temperature: 25-35 Celsius Thickness: 0.03mm Size: 40 x 200cm Pattern:Snakeskin Material:PVA How To Use: Base coating: Mix well the paint obtaining the color that you need. Film selections: Select printing film that you need. Place film: Cut out the fit size, place it flatly on water surface. Activation: Spray the activator uniformly on the film after placing the film on the water 60-90 seconds. Transfer: Keep 35 degrees, with a fixture alignment film paper uniform downward pressure. Soaking: About . Washing: Remove the remaining film. Drying: Remove the product' surface water. Storage : The film should be covered by plastic when store. A heavy / dark trash bag is perfect. Film Storage: 18-25 Celsius Optimum Temperature: 21.5 Celsius Humidity: 45-65% Do not open until ready to use to prevent contact with the air. Water Transfer Printing Film is a Hygroscopic Substance. It has the ability of attracting and holding water molecules from the surrounding environment... Do not store near water or in the room where your dip tank is located. Avoid direct sunlight. Package Contents: 1 x Water Transfer Printing Film Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Identifiant Fruugo: 406205237-861122484
  • EAN: 1160513952032

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Avertissements de sécurité: Please use under adult supervision

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: 11.49 CHF - Livraison entre jeu. 06 novembre 2025–mar. 18 novembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Wang Weifeng
  • Shanghai Henghe Trading Co., Ltd.
  • 288 Youdong Road, Guanhong Building
  • Shanghai
  • CN
  • 201199
  • meipaiyf017@163.com
  • 13825489288

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149