Lightweight plastic material, easy to carry and replace Simple and easy to install Stylish design enhances the appearance of your vehicle Product name: Bumper Sensor Cover Condition: New Part Number: 156126159, 156114929 Installation: Adhesive (stick or paste) Fitment: FOR ALFA ROMEO STELVIO 2016– Precautions: (1) In cold environments (or when the external temperature is below 18°C), the adhesion of the double-sided tape may decrease. Use a heating device such as a hair dryer to warm the vehicle's mounting surface and the inner rubber before installation. (2) When applying the double-sided tape, press it firmly. Once the adhesive is removed after application, its bonding strength may be reduced. Confirm the correct position before final installation. (3) Adhesive performance improves after bonding. Avoid washing the vehicle within 24 hours after installation. If washing or waxing is necessary on the same day, wait at least 1 hour and avoid soaking the installed area. Do not use automatic car wash systems or high-pressure water jets on the installation day. (4) Ensure the mounting surface is clean, dry, and free of dust, sand, or oil. For better adhesion, consider using an adhesion promoter (not included). (5) Avoid high-speed driving for 3 days after installation Material: Plastic Color: Black Package Contents: 1 x Bumper Sensor Cover Note: Other accessories or items shown in the image are not included. Lighting and display differences may cause slight variations in color between the product and the image. Measurement may vary by ±1–3 cm.