Product Description: 1. Complies with IEEE 802. Power over Ethernet (10/100/1000M supported). Extends PoE range by an additional 100 meters. 2. Automatically detects and protects PoE equipment from damage due to incorrect installation. 3. Plug-and-Play, no configuration required. 4. The 3-Port PoE Extender can forward both Ethernet and PoE power to 1 terminal device via Cat5, Cat5e, Cat6, Cat6e, UTP cable. 5. The 3-Port PoE Extender features 3 10/100/1000M LAN ports, one for power input and the other three for power output. Complies with 10/100/1000 BASE-TX, IEEE 802.3 -PoE. Used with APs, IP cameras, IP phones, and other network equipment in situations lacking power lines or far from electrical outlets. Installed in hotels, schools, buildings, villages, etc. Specification Network Standard: IEEE802.3, IEEE802.3u, IEEE802.3x PoE Connection Standard: IEEE 802.3af/at PoE Port Input Power: Input maximum 30W PoE Port Output Power: Output maximum 24W/average 8W per port PoE Power Receiving Input Transmission Core: 1/2+, 3/6-, 4/5+, 7/8- PoE Power Output Transmission Core: 1/2+, 3/6- POE Power Supply Transmission Distance: 100 meters Power Supply Transmission Medium: 10/100/1000BASE-TX: Category 5 and higher non-shielded twisted pair cable Address Table: 2K Packet Buffer Memory: 48 Switching Capacity: 1.0Gbps Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet; Regulatory Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU, EMC Directive 2004/108/EC; Operating Temperature: -10°C to 55°C Operating Humidity: 10%~90%, No condensation; Color: White Material: ABS Package Contents: 1 x POE Extender Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The measurement allowed error is +/- 1-3 cm.