H8147AF Single Laser Lens Optical Pickup CD Player

22.95 CHF
la livraison GRATUITE

H8147AF Single Laser Lens Optical Pickup CD Player

  • Marque: Unbranded

22.95 CHF

Économisez 6.00 CHF (20%)

Prix de vente recommandé

28.95 CHF
En stock
la livraison GRATUITE
Verkocht door:

22.95 CHF

Économisez 6.00 CHF (20%)

Prix de vente recommandé

28.95 CHF
En stock
la livraison GRATUITE

Nous acceptons les modes de paiement suivants

Description

Feature: 1. The most precise part of the optical drive, relatively easy to assemble because of its simple structure. 2. Has strong focusing performance that the laser head can accurately hit the beam onto the disc and receive the strongest signal. 3. Good stability and good safety performance, can enhance the capability and stability of optical drive. 4. Continuous operation mode for fast data reading, easy and stable to use. 5. Manufactured from premium plastic material, durable and sturdy, has long service life. Specification: Item Type: Laser Head Material: Plastic Model: H8147AFType: Laser lens for CD player Application: Single laser lens suitable for Sharp 8147AFLaser Head Installation Knowledge: 1. How to judge the damage of the laser head: The damage of the laser head generally means that it does not read the disc or it is very difficult to read the disc. Some discs with poor quality cannot be read at all. When the device can normally recognize the machine, it is usually a laser head. When the above situation occurs, you only need to disassemble the laser head to check the model of the laser head, and then purchase the corresponding model of bald head to install it, and the machine can be restored as new. 2. How to judge the model of the laser head: Generally, there is a model on the label of the laser head or on the base. If not, you can take the picture of the bald head and send it to us, and we will have professional technicians to confirm the model for you. Please confirm the model of the laser head you need before purchasing, so as to avoid unnecessary return.3. How to install the laser head: When installing the laser head on the shelf, do not move the balance bar on the shelf. When disassembling the laser head, you only need to adjust one screw of the balance bar on one side, and do not adjust the other side, so as not to affect the balance, otherwise the laser head may not read the disc. If you can't install it yourself, you can ask a professional to test the installation after purchase to avoid damage to the laser head and the machine. 4. How to open the solder joints: When the laser head is shipped from the factory, in order to prevent static electricity from damaging the laser tube, there are generally protective solder joints (a larger solder joint on the bald circuit board or on the flexible cable). The power supply pin of the laser tube is short-circuited to the ground. Before installing the bald head, it needs to be welded with an anti-static soldering iron. Heat the soldering iron to about 250°C-280°C, disconnect the power supply, and then open the protective point, otherwise the laser head will be unavailable. . Package List: 1 x Laser Head Note: Please double check the model of the laser head you need before purchasing, so as to avoid unnecessary return.
  • Identifiant Fruugo: 410978776-869743046
  • EAN: 7603816277982

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre lun. 03 novembre 2025–lun. 10 novembre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • No. 1-1, Door 57
  • Shihua Village
  • Qingshan District
  • Wuhan
  • CN
  • 430000
  • goldxinks@163.com
  • 0086 17786498762
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795