Orthodontic Dental Bonding Kit, Light-Curing Adhesive System, Tools, Small Set

23.95 CHF
la livraison GRATUITE

Orthodontic Dental Bonding Kit, Light-Curing Adhesive System, Tools, Small Set

  • Marque: Unbranded
Verkocht door:

Orthodontic Dental Bonding Kit, Light-Curing Adhesive System, Tools, Small Set

  • Marque: Unbranded

23.95 CHF

Économisez 7.00 CHF (22%)

Prix de vente recommandé

30.95 CHF
En stock
la livraison GRATUITE
Verkocht door:

23.95 CHF

Économisez 7.00 CHF (22%)

Prix de vente recommandé

30.95 CHF
En stock
la livraison GRATUITE

Nous acceptons les modes de paiement suivants

Description

Feature: 1. Mainly used for bonding various dental orthodontic accessories. 2. Easy to use, less waste, independent operation and other advantages. 3. Has high clinical bond strength, high efficiency and convneient to use. 4. Wonderful new - generation enamel adhesive resin, complete accessory. 5. There are 2 different types available, you can choose by your needs. Specification: Condition: 100% Brand New Item Type: Orthodontic Dental Adhesive Optional Type: Large Set, Small Set Material: Plastic Service Life: 18 Months Storage Condition: Keep below 25℃ (do not freeze) Suitable for: All kinds of dental orthodontic attachment adhesion Main Technical Performance Index: Curing time not more than 3000 adhesive shear strength MPa>17.2 Usage: 1. Tooth preparation: cleaning the enamel surface of the teeth, remove dirt on the tooth surface, rinse the teeth thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun. 2. Acid-eroded tooth surface: apply the acid-eroded agent on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry, and the tooth surface after acid-eroded is chalky. If there is no chalky appearance, the acid etching time is prolonged. 3. Primer: brush a thin layer of liquid on the etch surface of the teeth with a bristle brush, and brush a thin layer of liquid on the bonding surface of the brackets with another bristle brush (wet is enough). 4. Bonding: apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid agent to form a thin layer. Glue the bracket and the tooth surface immediately after applying the paste. Adjust the position of the bracket within 20 seconds, and press slightly for 5-10 seconds to prevent the bracket from sliding. Remove excess liquid and paste after 40-60 seconds. After curing for 5 minutes, orthodontic operation can be performed. Package List: 1 x Paste 3.5g1 x Etching Agent 2.5ml1 x Liquid Agent 8ml7 x Brush Head 1 x Needles1 x Mixing Pen Note: Keep below 25℃ (do not freeze)
  • Identifiant Fruugo: 411675879-870836094
  • EAN: 7603816800043

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: GRATUIT - Livraison entre lun. 10 novembre 2025–lun. 17 novembre 2025 - GRATUIT

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • No. 1-1, Door 57
  • Shihua Village
  • Qingshan District
  • Wuhan
  • CN
  • 430000
  • goldxinks@163.com
  • 0086 17786498762
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795