4-Pin Data Connector. Works with NMEA 2000-compliant GPS and chart-plotting units. Connects directly to the NMEA 2000 connector under the engine's cowling. The boat must have at least a basic NMEA backbone (starter kit) installed for the cable to interface with the GPS unit. Connects to engines without CommandLink Plus system. Compatible with Lowrance, Simrad, Garmin, and all NMEA 2000-compliant units. Model: 20-0120-37 Engine Interface Cable with 4-Pin Connector for NMEA 2000 Length: 7 meters Fitment: Outboard Motors 2006 – Present: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F250, LF250 2006 – Present: Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300 Includes SHO models Outputs: 4-stroke 50-250 HP and 2-stroke HDPI 150-350 HP engines RPM Alternator Voltage Engine Hours Engine Temperature Fuel Pressure Fuel Rate Oil Pressure Trim Water Pressure Color: Black Material: ABS Package Contents: 1 x Engine Interface Cable Kit Note: Only the items listed above are included. Other products are not included. Light reflection and differences in display settings may cause slight variations in color between the image and the actual item. Measurement may vary by +/- 1-3 cm.