Argon CO2 Refill Station Adapter for Small Welding Tanks with 1.5M Soft Hose 250 Bar

43.95 CHF
+ 11.49 CHF Livraison

Argon CO2 Refill Station Adapter for Small Welding Tanks with 1.5M Soft Hose 250 Bar

  • Marque: Unbranded
Verkocht door:

Argon CO2 Refill Station Adapter for Small Welding Tanks with 1.5M Soft Hose 250 Bar

  • Marque: Unbranded

43.95 CHF

Économisez 35.05 CHF (44%)

Prix de vente recommandé

79.00 CHF
En stock
+ 11.49 CHF Livraison
Verkocht door:

43.95 CHF

Économisez 35.05 CHF (44%)

Prix de vente recommandé

79.00 CHF
En stock
+ 11.49 CHF Livraison

Nous acceptons les modes de paiement suivants

Description

Please check your tank thread before making order.OD:22mm W21 8-14 / DIN477 / m22-14of your CO2 tank. common in:Russia , Korea Japan , UK , CLFrance , , , Switzerland ,Sweden , Ukraine , Germany . South AfricaCzech Republic , Singapore etc .This item is used to refill your small Argon / Co2 tanks from your tanks so that you can refill your small tanks easily .CO2 Refilling Station Charging AdapterType:W21.8-14How it works:In order to use it correctly, please follow our instructions:1. Cool for the Cylinder in the freezer for 1 hour.2. Screw the CGA320/W21.8 connection to a commercial CO2 gas cylinder.3. Disconnect the quick connector of the black adapter, and then tighten the black adapter to for the cylinder( must turn the knob on the top of the black adapter to the highest position,the whole process does not need to turn the adapter knob down to open for the cylinder,If the adjusting rod press down 6mm wide valve pin, this will close the valve and CO2 cannot enter)4. Connect the quick connector5. For most big cylinders: turn the big cylinder or lie it down.(some host tank has not the dip/syphon tube inside.)6. Carefully Open the valve of the gas bottle(The valve on for the Cylinder closes the flow if it is opened to much. This will happen if you open the big cylinder too much / too fast. The trick is to open the big cylinder very carefully. You will hear the air flow. So to fill it successfull)7. After about 15-20 sec., The cylinder is completely filled8. Close valve of the gas bottle9. Opening the bleed screw to drain residual gas10. Unscrew the CO2 - doneColour:BlackMaterial:MetalPackage Contents:1 * Charging ValveConnectorOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.When shopping, please pay attention to the size and dimensions of the product to ensure that it meets your needs. In the title and , we have provided detailed information about the product, including its features and specificationsWe want you to be completely satisfied with your purchase, so if you have any questions or concerns, please don't hesitate to . We are here to help and will do our best to assist you.Thank you for choosing our product. We hope you enjoy it!
  • Identifiant Fruugo: 412935154-872932663
  • EAN: 5943931441816

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Avertissements de sécurité: Must be used under the guardianship of adults

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: 11.49 CHF - Livraison entre mer. 05 novembre 2025–lun. 17 novembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Wang Weifeng
  • Shanghai Henghe Trading Co., Ltd.
  • 288 Youdong Road, Guanhong Building
  • Shanghai
  • CN
  • 201199
  • meipaiyf017@163.com
  • 13825489288

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149