1、2 OPERATING MODES: Easily switch between constant light mode, motion sensor mode, and daylight sensor mode to accommodate various lighting needs. Enjoy the convenience of 2 customizable operating modes for versatile lighting solutions. 2、DIMMABLE BRIGHTNESS: Adjust the brightness level smoothly with infinite dimming control, allowing you to create the great lighting ambiance with a single color temperature. 3、WIRELESS USAGE: With a built in 2000mAh battery, this under cabinet light is rechargeable for long lasting usage. Featuring a sensitive sensor head, it can detect motion within a range of 3 meters and 120 degrees, providing convenient lighting control. 4、VERSATILE APPLICATIONS: Ideal for use in closets, cabinets, bedrooms, stairs, hallways, kitchens, vehicles, campsites, and more. This under cabinet light is suitable for a wide range of scenarios, enhancing visibility and ambience. 5、MAGNETIC FIXTURE: Equipped with a magnetic attachment mechanism, simply attach the foam adhesive side of the magnetic plate to the wall or cabinet, and connect the magnetic side to the light fixture. This allows for easy removal and recharging without causing damage to wall or cabinets. Item Type: Under Cabinet Light Material: ABS+PC Light size: Approx. 30 x 4.3 x 2.6cm / 11.8 x 1.7 x 1in Battery: Lithium ion battery 2000mAh (built in) Color temperature: Single color temperature Rated power: 3.52W Rated voltage: 5V Sensing distance: 0-3 meters Protective level: IP20 Modes: Steady mode, human body sensing mode Brightness: Stepless dimming Suitable for: Closets, cabinets, bedrooms, staircases, corridors, kitchens, vehicles, campsites, etc. How to Use: Power button: Initially in the off state; Press once to enter steady mode; (The sensing function is not effective in steady mode and the light will not automatically turn off) Press twice to enter human body sensing mode; (The light will flash 3 times to indicate, then immediately enter human body sensing mode after flashing) Press three times to return to the off state, and repeat this cycle. When the light is on, pressing and holding the button can adjust the brightness, release the button to lock the brightness. (With brightness memory function) [Note on human body sensing mode] 1. This product is designed with both human body and light sensing. The light will only turn on automatically in conditions of insufficient light and when movement is detected. 3. The light will automatically turn off after around 25 seconds when no movement is detected. 4. If there is continual movement within the sensing area, the light will stay on. (Intelligent sensing, energy saving and convenient) Human body sensing precautions 1. Installing the light too low, too high, too deep, or with obstructions near the sensing probe will affect the sensing range. To ensure effective sensing, it is recommended to install in a suitable position with the sensing probe close to the side where people pass by. 2. Glass can block human body sensing. Installation instructions can be found in the user manual. 1 x Motion Sensor Light 1 x USB Charging Cable 1 x User Manual 2 x Magnetic Tape