Function: The fastest procedure – car is ready to start right after plugging in. Intelligent recognition of the ECU and car. Original CarLabImmo tool – you can trust it won't let you down. For FIAT Bypass – Emergency Start Device Overview: To use Fiat Bypass, connect it to the OBD2 socket in the car. The tool bypasses the original immobilizer signal and allows you to start the car immediately after plugging it in. For FIAT Bypass – Emergency Start Device Usage Requirements: - Car must be equipped with a mechanical key. - Car must be equipped with original parts. - The device works only in case of a lost key. - If the car has an SGW Module (some models from 2017 onward), an SGW Adapter is required to bypass the Security Gateway Module. How to Use For FIAT Bypass – Emergency Start Device: 1. Insert the device into the OBD port. (For some models from 2017, use the SGW Adapter.) The LED will blink rapidly. 2. Turn the ignition ON – the LED will blink slowly. 3. Start the car. 4. If the LED continues blinking rapidly after turning the ignition ON, remove the key, wait 30 seconds, and turn the ignition ON again. Repeat if necessary. FIAT Bypass – Emergency Start Device Emulator is compatible only with vehicles equipped with a metal key. It is not compatible with smart remote keys. Color: As shown Material: Plastic Note: Due to different product batches, appearance may vary. This does not affect functionality. This product is intended for professional use only. Do not purchase if you lack technical expertise. Installation guide is not included. Professional installation is strongly recommended. Please verify compatibility before purchase. Package Contents: 1 x Bypass Emergency Start Device 1 x 12+8 Connectors Contents listed above are the only items included. Other accessories are not included. Note: Lighting effects and display settings may cause slight color differences between the image and the actual item. Measurement error allowed is +/- 1-3 cm.