Heater Valve<br>Flame failure valve with inlet and outlet with Flare thread 5/8-18UNFOnly suitable for Low pressure application (max BTU rating: 50000)Suitable for Gas grill, heater, fire pit, fireplace if same connections<br>Flame failure valve with inlet and outlet with Flare thread 5/8-18UNF<br>Only suitable for Low pressure application (max BTU rating: 50000)<br>Suitable for Gas grill, heater, fire pit, fireplace if same connections<br><br>Specifications:<br>600mm thermocouple with M8*1 threaded <br>Bakelite knob OD 38mm, D shaft 6.1mm<br>Operation Instructions<br>1. Fix the valve on a plate or board of your grill or fire pit by the screw and flange.<br>2. Connect your inlet and outlet hose on inlet and outlet side. (fix it tightly enough in case of gas leakage)<br>3. Fix the thermocouple nut M8 on the valve end tightly (Check if your valve end thread if 8mm before you buy)<br>4. Connect thermocouple and end thread well<br>5. Open gas by correct size knob and push your valve around 5-10s till the thermocouple is heated enough.<br>6. Release your hand and it work properly If when you release hand, gas valve shut off again, please check<br>If your thermocouple is always be heated on flame<br>If the thermocouple end is well connected with valve<br>If the inlet and outlet side well connect with hose you have<br>Colour: yellow<br>Material: copper<br><br>Package Contents:<br>1 x Gas Control Valve<br><br>Only the above package content, other products are not included.<br>Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.