Development Board Open Source Software Defined Radio Platform Development Module 1MHz-6GHz

299.00 CHF
+ 9.49 CHF Livraison

Development Board Open Source Software Defined Radio Platform Development Module 1MHz-6GHz

  • Marque: Unbranded
Verkocht door:

Development Board Open Source Software Defined Radio Platform Development Module 1MHz-6GHz

  • Marque: Unbranded

299.00 CHF

Économisez 70.00 CHF (18%)

Prix de vente recommandé

369.00 CHF
En stock
+ 9.49 CHF Livraison

Politique de retour sur 14 jours

Verkocht door:

299.00 CHF

Économisez 70.00 CHF (18%)

Prix de vente recommandé

369.00 CHF
En stock
+ 9.49 CHF Livraison

Politique de retour sur 14 jours

Nous acceptons les modes de paiement suivants

Description

Development Board Open Source Software Defined Radio Platform Development Module 1MHz-6GHz

Development Board Open Source Software Defined Radio Platform Development Module 1MHz-6GHz Development Board Open Source Software Defined Radio Platform Development Module 1MHz6GHz Specification: Item Type:Development Board Material: PCB Basic Parameters: Design Frequency: 1MHz-6000MHz Data Bandwidth: 20MHz Sampling Accuracy ADC DAC: 8bit Sampling Rate ADC DAC: 20Mbps Data And Power Supply Interface: USB2.0 Open Source Level: Fully Open Source (software, hardware) RF Indicator: Maximum Transmission Power: 10dBm (less than the minimum stray transmission power according to radio regulation) Maximum Receiving Power: -5dBm (Note: Exceeding this value will burn the board) 64QAM Emission EVM: 1.5% Multiple Sampling Bandwidth: 20MHz Main Hardware: RFFC5072: Mixer provides local oscillator signals from 80MHz to 4200MHz MAX2837: 2.3GHz to 2.7GHz wireless broadband RF transceiver MAX5864: ADC DAC, 22MHz sampling accuracy 8bit LPC4320/4330: For ARM Cortex M4 processor, 204MHz Si5351B: I2C programmable arbitrary CMOS clock generator with 40MHz and sampling clock provided by 800MHz division MGA 81563: 0.1-6GHz 3v 14dBm amplifier SKY13317: 20MHz-6.0GHz RF Single Pole 3 Throw (SP3T) Switch SKY13350: 0.01-6.0GHz RF Single Pole Double Throw (SPDT) Switch Take the receiving process as an example, after the signal enters from the antenna, the process is as follows: The RF switch determines whether to amplify through a 14dB amplifier The signal is high pass or low pass filtered by an image suppression filter Signal processing udrffc5072 chip is mixed to 2.6GHz fixed if The latest firmware supports the if variable option If the range is 2.150ghz-2.750ghz Signal input MAX2837 chip mixing to baseband, output differential aliqsignal The MAX2837 chip can limit the signal bandwidth The max5864 chip digitizes the baseband signal and sends it to cpld and microcontroller for all repair The LPC4320/4330 processor sends the sampled data to the computer via usb Put the RFFC5072 and MAX2837 in the shielding cover to protect them from interference from the outside world and other chips on the board, and try to avoid some chips from electrostatic breakdown Features: Operating frequency from 1MHz to 6GHz Half duplex transceiver Up to 20 million samples per second 8 bit orthogonal sample (8 bit i and 8 bit q) Software configurable RX and TX gain as well as baseband filters Software controlled antenna port power (50 mA at 3.3V) SMA female antenna connector SMA clock female input and output for synchronization Convenient programming button Internal row of pins for expansion High Speed USB 2.0 USB Power Supply Open Source Hardware How to Use: Useaccordingtothesellingpointdiagraminstructions. Package List: 1 x Mainboard or 1 x Mainboard 1 x Antenna 1 x Data Cable 1 x Accessory Pack _x000D_ _x000D_
  • Identifiant Fruugo: 423337337-890818019
  • EAN: 7586095434348

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: WARNING! TO AVOID DANGER OF SUFFOCATION,KEEP AWAY FROM BABIES ANDCHILDREN. DO NOT USE IN CRIBS/BEDSOR PLAY PENS.THIS BAG IS NOT ATOY.
Ingrédients: Octinoxate 5.3560%
Numéro de pièce du fabricant: JG202627
Numéro de modèle: JG199530
Numéro de série: JG062027
Numéro de lot: JG196638

Livraison & retours

Expédition dans un délai de 3 jours

  • EXPRESS: 9.49 CHF - Livraison entre mer. 24 décembre 2025–ven. 02 janvier 2026

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • UMCU
  • shenzhenshixiangpulitiankejiyouxiangongsi
  • 301 (308), No. 32, Xiangyin Road, Nanlian Community, Longgang Street, Longgang District
  • Shenzhen
  • China
  • 518000
  • teuneva@126.com
  • 13535306199
  • https://www.fruugo.co.uk/umcu/m-17124?language=en

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 DCH.
  • Madrid
  • Spain
  • 28013
  • ecrepservice@hotmail.com
  • 34682797075