Intelligent Dehumidification Device Semiconductor Refrigeration Dehumidifier 50/60hz Item Type: Intelligent Dehumidification Device Material: Stainless steel Input Specifications: 1 Channel temperature and humidity input module Working Current: ≥1A Working Environment: Temperature: 0-50℃, Humidity: ≤85%RHR Measuring Range: Temperature: 0~80℃, Humidity: 0~99%RH Output Specifications: 2 Relay outputs, 220VAC/8A 30V/8A Resolution: Temperature: 0.1℃, Temperature: 0.1%RH Basic Error: Temperature: ±0.5℃, Humidity: ±3%RH Total Power: 50W, Cooling Power: 40W Dehumidification Capacity: 5m³ Cabinet body 24H Water Volume: 300ML under the condition of 30℃/80%RH Control Method: Automatic, manual Instructions: 1. The "Power" indicator light is always on after power on. 2. Click the "Mode" button to switch between manual mode and automatic mode, and the corresponding mode indicator lights. Manual mode "Dehumidification/-" key is the dehumidification control key, click to open or close. "Heating/+" button is the heating control button, click to turn on or off. The "Ventilation or Function Selection Settings" button is the ventilation control button, click on or off. Automatic mode The "Dehumidification/-" key is a negative value button. The "heat/+" key is a button for adding values. The "Ventilation or Function Selection Settings" button is a function selection button. (1). Click to enter the dehumidification "-C-" setting interface, and set the humidity level through the plus and minus keys. When the actual humidity is greater than (set value +1), the dehumidification function is turned on, and the dehumidification function is less than (set value -2). (2). Click again to enter the heating "-H-" setting interface, and set the temperature through the plus and minus keys. When the actual temperature is less than (set value-2), the heating function is turned on, and when the actual temperature is greater than (set value +1), the heating function is turned off. (3). Click again to enter the ventilation "-F-" setting interface, and set the temperature through the plus and minus keys. When the actual temperature is greater than (set value +1), the ventilation function is turned on, and when the actual temperature is less than (set value -2), the ventilation function is turned off. (Note: The ventilation and heating function requires additional functional modules, only built in switch relays)