This shaft oil seal is designed to seal rotating shafts with a lip seal construction. The seal is sized to fit a 47 mm shaft and to install in a housing bore of 62 mm, with a width of 7 mm. It provides a reliable barrier to retain lubricant and exclude contaminants in a variety of small to midsize equipment. Key benefits Prevents oil leaks from rotating shafts, helping maintain lubrication where it is needed. Helps protect bearings and seals from dirt, dust, and other contaminants. Simple, compact design that fits in a 62 mm housing bore and works with a 47 mm shaft. Suitable for use in a range of machines and components that require a shaft seal with lip seal performance. Key attributes Size: 47 x 62 x 7 mm (inner diameter 47 mm, outer diameter 62 mm, width 7 mm) Type: shaft oil seal with lip seal design Function: seals rotating shafts to retain lubricant and exclude contaminants Compatibility: intended for applications where a 47 mm shaft fits a 62 mm housing bore and a 7 mm wide seal is required Applications Gearboxes and transmissions in industrial equipment Hydraulic pumps and hydraulic systems Motors and other rotating equipment such as small pumps or fans Installation and maintenance notes Verify shaft diameter and housing bore match the seal's 47 mm and 62 mm dimensions before installation. Clean all mating surfaces and remove any debris prior to seating the seal. Lightly lubricate the sealing lip with the appropriate lubricant recommended for the equipment during installation. Ensure the seal is seated evenly without nicking or damaging the sealing lip. For results, confirm compatibility with your specific equipment's shaft size, housing bore, and operating conditions before installation.