3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is constructed from stainless steel and features an automatic immersion design for safe and efficient heating. Suitable for use in plastic barrels, bathtubs, swimming pools, fish tanks, buckets, and other water-filled containers. Ensure the water level is at least 25 to 30 cm deep to allow full submersion of the heater. The unit is designed to float on the surface; adjust the power cord to maintain proper positioning. Always ensure the heating element is completely submerged during operation. If used in a container with soft or inflatable material, place a ceramic tile under the heating pipe to prevent direct contact and potential damage. Fill the container with water, insert the heater, and plug it in. When the indicator light turns on and small bubbles appear around the heating pipe, heating begins. For large volumes of water, unplug the unit halfway through to check the temperature. Once the desired temperature is reached, disconnect power immediately and wait 20 seconds before removing the heater from the water. Safety instructions: - The metal heating tube must remain fully submerged in water during use. - Do not touch the water while the heater is plugged in or operating. - Always unplug the unit before adjusting, removing, or contacting the water. - The stainless steel component must stay fully submerged to avoid damage. Specifications: - Type: Electric Water Heater - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Package Includes: 1 x Immersion Heater Note: An appropriate adapter will be provided based on your country’s requirements.