Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

104.00 CHF
+ 5.99 CHF Livraison

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

  • Marque: Unbranded
Verkocht door:

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

  • Marque: Unbranded

104.00 CHF

Économisez 105.00 CHF (50%)

Prix de vente recommandé

209.00 CHF
En stock
+ 5.99 CHF Livraison
Verkocht door:

104.00 CHF

Économisez 105.00 CHF (50%)

Prix de vente recommandé

209.00 CHF
En stock
+ 5.99 CHF Livraison

Nous acceptons les modes de paiement suivants

Description

Condition: 100% Brand New <br>Item Type: Cylinder <br>Material: Aluminum Alloy <br>Color: As Pictures Shown <br>Optional Type: ACK63-90R, ACK63-90L <br> <br>Inner Diameter: Approx. 63mm / 2.5in <br>Piston Rod Outer Diameter: Approx. 20mm / 0.8in <br>Action Type: Double Action <br>Working Medium: Air (filtered by a Filter Screen Above 40μm) <br>Operating Pressure Range: Approx. 0.15-1.0MPa (22-145psi) <br>Guaranteed Pressure Resistance: 1.5MPa (215psi) <br>Working Temperature (℃): -20-80 <br>Operating Speed Range: Approx. 50-200mm/s 2-7.9in/s <br>Travel Tolerance Range: 1.0 <br>Rotation Angle Tolerance Range: Approx. ±1.5° <br>Buffer Type: None <br>Take over Caliber: PT1/8 <br>Installation and Use <br>1. When the cylinder clamps the workpiece, it must be performed within the clamping stroke, and the clamping operation cannot be performed within the rotation stroke. <br>2. The clamping plane must be perpendicular to the cylinder axis. After the workpiece is clamped, please do not move the workpiece. <br>3. Before piping the cylinder, the debris in the pipe must be removed to prevent debris from entering the cylinder. <br>4. The medium used in the cylinder should be filtered by a filter element above 40μm before use. <br>5. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, add dust blocking caps to the intake and exhaust ports, and apply rust prevention oil to the end of the piston rod.<br>1、This is a double?acting rotary clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can reach 200mm/s. <br>2、The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work. <br>3、The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder. <br>4、The hard protective layer is resistant to wear and corrosion and can be used in harsh working environments. <br>5、The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes.1 x Cylinder Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • Identifiant Fruugo: 428219790-899763782
  • EAN: 6471506039599

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Not suitable for children under 36 months
Ingrédients: Others

Livraison & retours

Expédition dans les 24 heures

  • STANDARD: 5.99 CHF - Livraison entre jeu. 06 novembre 2025–ven. 14 novembre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Luminary Lane
  • Dongguan Zuiyu Electronic Technology Co., Ltd.
  • Room 401, No. 19, Dongxiang, Yanggonglang, Qiaotou Town, Dongguan City, Guangdong Province
  • Dongguan
  • CN
  • 523520
  • simona14@163.com
  • 17512067209

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901