43392MHz For DEA Rolling Code Fixed Code DEA GTI2 GTI4 Remote Controls Compatible with GT2 GT4 GT2M GT4M MIO TR2N DEA GTI2 GTI4 Garage Remote Control 433.92MHz Description: 1. Name: DEA remote control. 2. Type of programmingProgramming with the receiver 3. Frequency: 433MHz, 433.92MHz 4. Code: DEA rolling code and Fixed code. 5. Number of channels: 2 or 4. 6. BatteryInclude Battery Compatible With DEA GTI2 DEA GTI4 DEA 433.92MHz Rolling Code DEA GT2,GT4 DEA MIO TR2,TR4 DEA MIO TR2N,TR4N DEA GENIE 273,GENIE 273L DEA GOLD 288,GOLD 289 DEA 433.92MHz Fixed Code DEA 433-1, 433-2, 433-4 DEA MIO TD2, MIO TD4 DEA punto-2, punto-4 DEA GT2M, GT4M How is it programmed? When a button is pressed, the control-transmits the radio signal and tums on the LED that indicates, in addition to the type of code used HCS rolling code-red LED(factory setting) DIP SWITCH HT12-green LED; D.A.R.T.DEA Advanced Rolling Transmission-alternating red/green LED Change transmission code Hold down keys T1 and T2. When the radio control LEDS tum on(10s),wait until they flash to indicate the type of code set:. 1 flash per second=HCS rolling code 2 flashes per second =DIP SWITCH HT12 3 flashes per second= D.A.R.T. Hold down Ti and use T2 . to change the type of flash. Once the new code has been selected, press and hold down key T2 until the LEDs tum off (5s) Programming with receiver (Refer to the receiver manual for information on the storage procedure.) 1. Open the gate opener and find the programming button briefly, an LED will light up on the receiver P.C.B., you now have 10 seconds to perform the next step Include * Remote control (with batteries) * User's manual * Key chain _x000D_