1. Product Content: You will receive 2 pieces of range hood light bulbs, with a quantity that meets replacement needs. 2. Product Size: The diameter of the range hood light replacement is approximately 6.9cm/2.72in, the height is about 2.2cm/0.87in, and the length is around 14.5cm/5.71in. It is recommended to measure the size of the lamp to be replaced and check if the voltage and power are suitable before ordering. 3. Material: The LED range hood light bulb is made of stainless steel and PP material, which are sturdy, reliable, and not easily broken or damaged, allowing for confident use. 4. Performance: The range hood can work under DC 12V voltage, with a power of 1.5W and a color temperature of 6500K, providing sufficient luminous efficiency. 5. Built-In Driver Solution: The kitchen range hood light bulb is compatible with 12V DC working voltage. It is necessary to check the adaptability of the lamp to be replaced. Additionally, its installation can be completed with a light click, which is simple and convenient, offering a solution for the built-in driver. 6. Reasons for the range hood light not lighting up after replacement: 1. Power failure: Check if it is plugged into a power socket to ensure the power is on. 2. Wires and plugs: Check if the plugs are consistent; if they are, check if the positive and negative poles of the wires match those of the range hood wires. If there is no power, they can be swapped and powered on. 3. Voltage issue: The lamp is 12V1.5W and cannot be used at voltages higher than 12V1.5W, as this will directly burn out the lamp. 4. Control panel problem: If other functions are normal but only the light is not on, there may be a malfunction of the control panel, and it is necessary to contact the manufacturer or professional maintenance personnel for repair. 7. Colour: As Shown 8. Material: plastic 9. Package Contents: 2 x Range Hood Light (Only the above package content is included; other products are not included.) 10. Note: Light reflection and different displays may cause the color of the item in the picture to differ slightly from the real thing. The allowed measurement error is +/- 1-3cm.