1. High energy efficiency, long life, low consumption, convenient and safe to use, energy saving and durable, widely used in the field, night camps, night market vendors, driving and family outage emergency helpers 2. It can be used as the front-stage boost inverter circuit of pure sine wave, modified sine wave, single-silicon machine, and four-silicon machine. For electronic enthusiasts DIY production, maintenance and replacement, manufacturers control cabinet supporting products and so on. 3. You can use electrical appliances: lamps, non-inductive household appliances, small electric rice cookers, (note: support all ''electronic products'') such as: energy-saving lamps/solder/switching supply/satellite TV receiver/bulb/ LED lamp/LED energy-saving lamp/fluorescent lamp/DVD player/VCD player/EVD player/LCD TV/color screen TV/flat screen TV/notebook/computer/various computer monitors/all electronic charger products/etc. 4. Notice: This board is a high-frequency square wave AC output, so general inductive appliances cannot be carried! ! (Such as: electric motors, electric fans, coil , etc. cannot be used directly) Another: Simple resistance-capacitance step-down small electrical appliances, cheap resistance-capacitance step-down LED lamps, etc. may not be used 5. Many multimeters that output high-frequency square-wave AC voltage cannot measure or display low and high levels (it is incorrect, not the actual voltage) (can be measured by the multimeter in DC mode after rectification) When in use, it is necessary to consider that the supply should not be in a full-load working state for a long time. If you need to work continuously for a long time, it is recommended to operate at 80% efficiency. Leave room for use to that the supply can work for a long time, otherwise it may cause artificial ear failure. Special reminder: if the load is an electronic switching supply product, it is necessary to output a high-frequency diode on our board, because the rectifier part of many switching supplies uses ordinary rectifiers in order to save costs, so it is connected to the "high-frequency AC output" It will cause the rectifier diode of the electrical appliance to rapidly heat up and damage it, and the diode will break down the circuit. Eventually cause the inverter board to burn out. Input: DC12V Output: AC 0-220V-330V-380V-420V and AC18V Static no-load current: about 0.35A Output frequency waveform: about 20KHZ high frequency square wave Protection: no protection Type: DC/AC Inverters Output Frequency: Inverter Boost Board Output Type: Single color:As shown Material:PC+Metal Package Contents: 1 x Inverter Module(500W) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.