For Nissan Navara D23 NP300 2017-2019 Car Sticker Rearview Side Mirror Cover Wing Cap Exterior Door Rear View Case Trim Carbon

47.95 CHF
+ 8.49 CHF Livraison

For Nissan Navara D23 NP300 2017-2019 Car Sticker Rearview Side Mirror Cover Wing Cap Exterior Door Rear View Case Trim Carbon

  • Marque: Unbranded
Verkocht door:

For Nissan Navara D23 NP300 2017-2019 Car Sticker Rearview Side Mirror Cover Wing Cap Exterior Door Rear View Case Trim Carbon

  • Marque: Unbranded

47.95 CHF

Économisez 16.05 CHF (25%)

Prix de vente recommandé

64.00 CHF
En stock
+ 8.49 CHF Livraison

Politique de retour sur 14 jours

Verkocht door:

47.95 CHF

Économisez 16.05 CHF (25%)

Prix de vente recommandé

64.00 CHF
En stock
+ 8.49 CHF Livraison

Politique de retour sur 14 jours

Modes de paiement:

Description

For Nissan Navara D23 NP300 2017-2019 Car Sticker Rearview Side Mirror Cover Wing Cap Exterior Door Rear View Case Trim Carbon

For Nissan Navara D23 NP300 2017-2019 Car Sticker Rearview Side Mirror Cover Wing Cap Exterior Door Rear View Case Trim Carbon Feature: and high quality. Easy installed and No modification needed, double side Automotive tape at the back. It can cover existing scratches and prevent your car from scratch and abrasion. Provide eye-catching show off and personlise your car. Specification: Material: ABS Plastic Color: Carbon Fiber Black /Silver Fitment: For Nissan Navara D23 Frontier NP300 2017 2018 2019(Only fit WITHOUTturn signal version.) *Adhesive type, it needs to be attached to the original mirror cover. Package Included: 2 x Mirror Cover Installation Tip: 1. Clean the location of the installation with rubbing alcohol before proceeding. (make sure to remove any grease, wax or dust etc) 2. Please ensure that the product completely fits before proceeding with installation. (Note: if there any questions or if the product does not fit properly, please contact us) 3. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature, heat installation location, and plate with a hair dryer or a heat gun on low setting 4. Carefully place the product in desired location and press down for about 1-2 minutes, (Note: do not wash your car for 24-hours. The adhesive should be cured after 12-hours) 5. The installation is complete. Note: Please check the vehicle model is the same with the picture before installation. If you can't install,please get professional maintenance staff to help you install.
  • Identifiant Fruugo: 431922882-907215406
  • EAN: 6083222345597

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: This product contains small parts that may cause suffocation if swallowed by children.
Ingrédients: Stainless steel and other metals

Livraison & retours

Expédition dans un délai de 3 jours

  • STANDARD: 8.49 CHF - Livraison entre jeu. 15 janvier 2026–ven. 23 janvier 2026

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Govee Moments Limited
  • Govee Moments Limited
  • Room 023, 9/F, Block G, Kwai Shing Ind Bldg (Stage 2) 42-46 Tai Lin Pai Road, Kwai Chung, Nt
  • Hong Kong
  • HK
  • 999077
  • govee2020@outlook.com
  • 085244096945

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera
  • Puglia
  • Trani
  • IT
  • 75100
  • itlyhsrl@gmailcom
  • 0039 3917722149