1,MICROPHONE ARM STAND SET: The set contains all the items you need for studio recording and live sound reinforcement, such as microphone stands desktop mounting clips, 3 or 8 to 5 or 8 metal screw adapter, filter, shock mount and cable tie, etc. Easy to assemble and transport. 2,STABLE MIC STAND: The extra strong spring of the arm prevents the microphone from accidental dropping, noise generation and shaking. With table mount clamp and protective sponge layer, can be easily attached to any desktop with a thickness of 5cm. 3,SHOCK MOUNT: Provides protection for microphone, making it easier to install and prevent falling. The hole diameter of the shock mount is 52mm. Suitable for condenser microphones such as for NW 700, NW 800, for FIFINE K6698, for MPM 1000, for AT2020USBand, for AT2020, for Hyperx Quadcast, for AT2035. 4,DOUBLE SCREEN FILTER: The 1st screen blocks air blasts as any filter normally would. The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. 5,SELF LOCK: The cable tie adopts a self locking design, which has strong locking force, easy operation and prevents getting stuck. Suitable for schools, album studios, etc. Item Type: Microphone Arm Stand Material: Aluminum Color: Black Characteristics: Desktop shock mount filter 1 x Suspension Stand 1 x Adapter 1 x Cable Tie 1 x Filter 1 x Microphone clip 1 x Shock Mount 1 x Clip 1 x Nut Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.