SUBMERSIBLE PUMP FOR AQUARIUM 12V IMMERSION Brushless DC Motor: The aquarium submersible pump motor adopts brushless DC motor and operates without spark. High efficiency: the water pump has small starting current, high efficiency, stable and reliable operation, low power consumption and energy saving. Ceramic motor shaft: The pump adopts ceramic motor shaft with high wear resistance, and the continuous service life is more than 20 000 hours. IP68 water resistance: The submersible pump for aquarium can be amphibious, and the water resistance is IP68. Wide application: water heater pressure, hydraulic mattress, hot water circulation, oil pump, humidifier, washing machine, small irrigation, cooling system, heating system, etc. Specification: Item Type: Aquarium Submersible Pump Material: Structural plastics Model: ZC-A40 Rated Voltage: DC12V Use voltage: DC5V-DC12V Operating Current: 1050 Ma Lifting: 4m10 percent Flowing: 550L or H 10 percent Noise: 35dB within 0.5M Fluid temperature range: 0 to 65 or 0 to 149 List of packages: 1 x submersible pump for aquarium Note: 1. The water pump does not have self-priming capability, and the water pump cannot be used without water. 2. The installation site should be lower than the horizontal plane. Water must be able to flow into the pump. 3. The water pump can be used for indoor temperature diving, but cannot be used for high temperature diving. 4. The high temperature of the water pump can not be used for a long time continuously. 5. Install the filter on the pump pipeline inlet. Red cable black cable — The water pump does not have self-priming capability, and the water pump cannot be used without water. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.