PD3002G (Model) is a 25W high-power 100/1000Mbps POE Converter, which is a conversion device that converts 40V-57 V POE signal to 24V POE signal.The PD3002G has one POE input port and one POE output port. The POE input port is connected to the 48V equipment and is responsible for receiving 40V-57V POE signals. The POE output port is connected to the 24V PD device and is responsible for output 24V POE to the 24V PD device, such as various 24V POE wireless Bridges and wireless Access Points.PD3002G Max output power 25W, conforms to IEEE802.3af/at POE standard, data rates 100/1000 Mbps, more than 90% conversion efficiency, 100 meters transmission. Support 40V-57V PoE input, output 24V Passive PoE.Note: In case if 803.3af compliant is used, total output power should not exceed 12.95w (limited by the 803.3af standard).IEEE802.3af/at POE international standard protocol and handshake recognition functionInput: wide POE voltage DC (POE) 40V-57VBoth Active PoE and Passive PoE inputs are supportedInput support 12+,36- / 45+,78- full compatibilityOutput: 24V Passive PoE signal,and support to customize other voltage of the PoE outputsignalOutput POE signal power pin 45+/78- 10M/100M/1000M/1G adaptive transmission speedThe 21CM tail line extends the outlet, so that the outlet can be bent and folded or throughthe wall, and the installation is more flexibleWith overheat protection, overvoltage protection, overload protection, short circuit protectionThe conversion efficiency is over 90%High temperature and environmentally friendly ABS plastic shellColor: As ShownMaterial: plasticPackage Contents:1 x PoE ConverterOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.