Power: 90W Max Input voltage: 5-24V Port:Type-c / DC 5521 Power supply mode: PD/QC/DC Fast Charging Protocol: PD2.0+QC3.0 Temperature range: 150 -450°C Temperature stability: ±2℃ Screen: TFT color screen Soldering tip:KU Menu Settings 1. TEMP: temperature Calibration 2. SLEEP : can be set to 2-20 minutes. 3. UINT SET: temperature unit ℃/℉ switch 4. SCREEN SET: Screen orientation setting 5. START SET 6. STANDY SET: standby time can be set to 3-120 minutes 7. SLEEP TEMP: sleep temperature of this product can be set to 100-240 ℃.Default: 200 8. Restore SET: all settings will be reset 9. Voltage SET: voltage can be adjusted.This setting is only for the type-c (When the output voltage of the charger is sufficient, but the corresponding output current is insufficient, causing the soldering iron to not work properly, the voltage can be adjusted to the level where the charger can work normally) Colour:Black Material:Metal + Plastic Package Contents: 1 x Soldering iron host(with KU soldering iron tip) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. 5. More personalized parameter settings to suit your usage habits. Supports temperature calibration, input voltage setting (only for type-C ), temperature unit ℃/℉ switching, screen display effect switching, and sleep temperature settings, etc. 3. Sleep mode and standby mode support lifting to wake up, and more power-saving 2.Colorful English TFT display with clear display of input voltage and soldering iron temperature. 4.Ergonomic handle design for comfortable grip and suitable length. Plastic shell and cap, and easy to store. 1. PD+DC Power Supply: dc power supply Max 90W Rapid Heating up, type-c interface can use for fast charging, up to 65w.