Specification: Origin: Mainland China Model Number: M2 SSD Heatsink Applicable model: For PS5 optical drive/digital Product weight: 100g Package size: 178x92x24mm/7.01x3.62x0.94in Installation method: 1. Take out a thick heat dissipation pad (2.6mm thick) and stick it to the bottom of M 2 SSD 2. Connect the heat dissipation pad (thickness: 0.9mm) to the bottom of the radiator (please cut the heat dissipation pad to an appropriate position according to the length of M 2 SSD) 3. Install the heat sink into the hard disk slot of the console 4. Firmly press down the radiator and tighten the screws Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Included: 1 X Heat Sink 3 X Insulation Pads 1 X Screw 1 X Screwdriver 1. Heat dissipation principle: The heat sink is a device used to dissipate heat from the heating electronic components in electrical appliances. For example, the CPU (central processing unit) in the computer needs to use a fairly large heat sink. The power tube, line tube and power amplifier tube in the TV need to use the heat sink. When in use, a layer of heat dissipation sponge is separated on the contact surface between the electronic components and the heat sink, so that the heat emitted by the components can be more effectively transmitted to the heat sink, and then distributed to the surrounding air through the heat sink. 2. Easy to install and operate: The assembly is precise and tight, easy to install, and will not damage the hard disk. 3. Durable material: Aluminum alloy greatly improves the corrosion resistance, hardness, wear resistance, insulation and heat resistance of SSD radiator, and extends the service life of the console. 4. Applicable model: M.2 SSD heat sink for PS5 digital version/CD version.