3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for safe and efficient heating. Suitable for use in plastic barrels, bath barrels, bathtubs, swimming pools, fish tanks, buckets, and other water-filled containers. To use, ensure the water level is at least 25 to 30 cm deep so the heater can be fully submerged. The unit will naturally float on the surface; adjust the power cord to position it properly. Always ensure the heating element is completely submerged in water during operation. For inflatable pools or bathtubs made of sensitive materials, place a ceramic object under the heating pipe to prevent direct contact and potential damage. Fill the container with water, place the heater inside, and plug it in. Once the indicator light turns on and small bubbles appear around the heating element, the unit begins to heat. For large volumes of water, unplug the device halfway through heating to check the temperature. When the desired temperature is reached, unplug the power first, wait 20 seconds, then remove the heater before using the water. Safety Notes: - The metal heating tube must be fully submerged in water at all times during operation. - Never touch the water while the heater is plugged in. - Always unplug the device before handling or removing it. - The stainless steel ball section must remain fully submerged to avoid damage. Specifications: - Type: Electric Water Heater - Model Number: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Package Includes: 1 x Heater (Adapter provided based on country of destination)