Usage Tips:["Description:\nbrand and \nFeature:\nMotor for record player, vinyl record player, antique record player and so on.\nCW means clockwise and CCW means counterclockwise.\nYou can only tune 33, then 45, and 78 at the end.\nAt 33 speeds, the motor speed is: 1130 ± 2%.\nAt 45 speeds, the motor speed is: 1520 ± 2%.\nAt 78 speed, the motor speed is: 2600 ± 2%.\nThe diameters of the copper sleeves are different. When the speed of the motor is the same, the turntable speed of the record player is different.\nThe width of the copper sleeve is 7 mm, which can adapt to various width belts on the market.\nThe distance between the top of the copper sleeve and the surface of the motor determines whether the belt and the turntable are on the same plane. If the difference is relatively large, the belt will easily fall out and the motor will not work properly.\n\nSpecifications:\nItem Type: Turntables Motor\nModel Number: EG530SD-3F\nRated Voltage: DC5-12V\nDirection of rotation: CW\nMaterial: Copper\nSize: Motor diameter: 33mm/1.2in; Top distance: A/C: 22.5mm/0.8in, B: 18.5mm/0.72in, D: 20mm/0.78in; Height: 25mm/0.9in; Installation screw hole distance: 22.5mm/0.8in\nColor: Silver+Gold\nOptional Type: A: 14+7mm/0.5+0.2in, 5.5+7.5mm/0.21+0.29in; B: 11.5+7mm/0.4+0.2in, 5.5+7.5mm/0.21+0.29in; C: 14+7mm/0.5+0.2in, 4+7mm/0.1+0.2in; D: 10+7mm/0.3+0.2in, 4+7mm/0.1+0.2in\nQuantity: 1 Pc\n\nAdjusting Method:\nWhen the changeover switch reaches 33, use a small flat-blade screwdriver to adjust the resistance of the L hole of the motor, and the normal disc is 33 revolutions per minute.\nWhen the changeover switch reaches 45, use a small flat-blade screwdriver to adjust the resistance of the H hole of the motor, and the normal disc is 45 revolutions per minute.\nWhen the transfer switch reaches 78, use a small flat-blade screwdriver to adjust the resistance on the PCBS board. The normal disc is 78 revolutions per minute.\n\nNote:\nNo retail package.\nTransition: 1cm=10mm=0.39inch\nPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Includes:\n1 x Turntables Motor"]