Key benefits Safe lowvoltage operation (AC 12V/24V) that reduces risk to people and fish when used with a proper transformer. Fully sealed IP68 construction for reliable underwater use that adds color and atmosphere to ponds, fountains, and outdoor features. Flexible aiming and simple mounting let you direct light exactly where needed for accenting water, hardscape, or landscape elements. What this product does IP68 waterproof and fully submersible: sealed for continuous immersion (see depth limit below). Provides colored illumination to enhance ponds, fountains, small pools, and outdoor décor. Lowvoltage operation (AC 12V/24V) for safer installation and use — transformer not included. Key specifications and important notes Voltage: AC 12V/24V low voltage (transformer required but not included). a compatible AC 12V or 24V transformer separately. Waterproof rating: IP68, fully sealed housing and IP68 waterproof power joint. Adjustable beam: rotates 180° up/down and 360° left/right for precise aiming. Mounting: secures with three screws to a wall or pool bottom to prevent floating. Depth limitation: do not install submerged at depths greater than 39 inches. Installation and compatibility tips Mount the light with the supplied screw points to the desired surface (pond wall, fountain base, pool shallow area) and make sure the housing is tightly sealed before immersion. Use a compatible AC 12V or 24V transformer sized for the number of lights you will power; connect through the IP68 waterproof joint. Avoid deepwater installation; this light must not be placed more than 39 inches underwater. Practical use scenarios Pond or fountain accent lighting: place around the perimeter or beneath a fountain nozzle to create layered color effects and nighttime focal points. Shallow pool or water feature edge lighting: aim lights to highlight steps, cascades, or decorative stones in installations shallower than 39 inches. Outdoor event and landscape lighting: mount on retaining walls or near plant beds to provide colored uplighting for parties, holidays, or permanent landscape accents. What to expect Reliable, sealed lights designed for underwater and wetarea use when installed according to specifications. Adjustable mounting and aiming for tailored lighting effects. Requirement to a compatible AC 12V/24V transformer separately for operation. Warnings Transformer not included. Do not connect directly to mains power without a proper AC 12V/24V transformer. Do not install underwater at depths exceeding 39 inches. Verify transformer capacity and waterproof connections before final immersion.