The power driver passes 100% full load aging test, withstands 5G vibration test, no-load consumption less than 0.5W, and can withstand 300VAC surge input for 5 seconds The power adapter has a high conversion efficiency of 72-82%, and can work under full load in the temperature range of -20℃ to +70℃ with natural air cooling AC-DC single group output power converter with short circuit, overload, over voltage and over temperature protection to protect your equipment Switching power supply uses metal case with good heat dissipation, applied in industrial automation, DIY project engineering, test and measurement instruments, etc. In order to prolong the service life, please do not let the transformer exceed the rated current for a long time DC VOLTAGE:24V; RATED CURRENT:1.1A; CURRENT RANGE:0-1.1A; RATED POWER:26.4W; RIPPLE & NOISE(max.):120mVp-p; VOLTAGE ADJ.RANGE:22~27.6V; VOLTAGE TOLERANCE:±1.0% LINE REGULATION:±0.5% LOAD REGULATION:±0.5% SETUP,RISE TIME:1800ms,23ms/230VAC 4000ms, 30ms/115VAC at full load HOLD UP TIME (Typ.):80ms/230VAC 14ms/115VAC at full load VOLTAGE RANGE:88-264VAC 125 - 373VDC (Withstand 300VAC surge for 5sec. Without damage) FREQUENCY RANGE:47~63Hz EFFICIENCY(Typ.):86% AC CURRENT (Typ.):0.7A/115VAC 0.4A/230VAC INRUSH CURRENT(Typ.):COLD START 45A/230VAC LEAKAGE CURRENT:less than 2mA/240VAC OVERLOAD:110 -180% rated output power Protection type: Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE:27.6 ~32.4V Protection type: Shut off o/p voltage, clamping by zener diode WORKING TEMP:-20 -+70°C (Refer to"Derating Curve") WORKING HUMIDITY:20~90% RH non-condensing STORAGE TEMP,HUMIDITY:-40-+85℃,10-95% RH TEMP.COEFFICIENT:±0.03%℃(0~50℃) VIBRATION:10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z