3X 4S 40A Li-Ion Lithium Battery 18650 Charger Pcb Bms Protection Board for Drill Motor 14.8V 16.8V Lipo Cell Module

5.95 CHF
+ 3.99 CHF Livraison

3X 4S 40A Li-Ion Lithium Battery 18650 Charger Pcb Bms Protection Board for Drill Motor 14.8V 16.8V Lipo Cell Module

  • Marque: Unbranded
Verkocht door:

3X 4S 40A Li-Ion Lithium Battery 18650 Charger Pcb Bms Protection Board for Drill Motor 14.8V 16.8V Lipo Cell Module

  • Marque: Unbranded

5.95 CHF

Économisez 4.00 CHF (40%)

Prix de vente recommandé

9.95 CHF
En stock
+ 3.99 CHF Livraison

Politique de retour sur 14 jours

Verkocht door:

5.95 CHF

Économisez 4.00 CHF (40%)

Prix de vente recommandé

9.95 CHF
En stock
+ 3.99 CHF Livraison

Politique de retour sur 14 jours

Modes de paiement:

Description

3X 4S 40A Li-Ion Lithium Battery 18650 Charger Pcb Bms Protection Board for Drill Motor 14.8V 16.8V Lipo Cell Module

Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650 polymer lithium battery) Charging voltage: 16.8 V-18.1 V Continuous discharge current (upper limit): 40 A (if the cooling environment is not good, reduce the use of charging current) colour: green Material: plastic +metal size: 54x44x4mm Package Contents: 3 x 4S 40A Li-ion Lithium Battery Protection Board Note 1: The successful start of the drill requires three 15C-20C power batteries, or six 10C-15C power batteries (the normal 18650 cannot start the drill!). Note 2: strictly in accordance with the map wiring 0 V, 4.2 V, 8.4 V, 12.6 V, 16.8 V, do not intentionally short circuit. Note 3: When using the brush motor load, try to connect a non-polar capacitor (withstand voltage above 25 V, CAPACITY 10 uF 100 uF) to the positive and negative terminals of the motor to avoid the reverse peak of the motor. Break the MOS tube. Note 4: 4 groups of batteries in series, make sure that the voltage of each group of batteries, if not the same, complete each battery separately and use it in series. The discharge test, the battery voltage drops faster than the group is a poor battery.
  • Identifiant Fruugo: 449352318-945196460
  • EAN: 6131413414048

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Numéro de pièce du fabricant: I750013551
Numéro de série: I750013551

Livraison & retours

Expédition dans les 24 heures

  • STANDARD: 3.99 CHF - Livraison entre mer. 07 janvier 2026–ven. 16 janvier 2026

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Shenzhen Haoyouqu Electronics Co., Ltd.
  • Shenzhen Haoyouqu Electronics Co., Ltd.
  • Tian'an Community
  • Shatou Subdistrict
  • Futian District
  • shenzhen
  • CN
  • 518000
  • woebgueh@outlook.com
  • 15320490316

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • 0utong GmbH
  • 0utong GmbH
  • Brehmstr, 56,40239 Duesseldorf
  • Düsseldorf
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698