Irrigation Solenoid Valve Coil DC Latching 220VAC 24VDC 12VDC 24VAC(24VDC) Keep your irrigation valves working reliably with a replacement solenoid coil designed for multiple control voltages and DC latching operation. This coil is intended for use with irrigation solenoid valves and restores valve actuation when an existing coil has failed. Key benefits Restores valve function quickly: a burnt or faulty coil to get a stuck or nonresponding valve working again without replacing the whole valve body. Flexible voltage options: supplied/available for DC latching, 220VAC, 24VDC, 12VDC, and 24VAC(24VDC) requirements so you can match the coil to your controller or power source. Costeffective maintenance: swap the coil rather than the entire valve assembly to lower costs and downtime. What it does Actuates irrigation solenoid valves by converting electrical input (as listed) into the mechanical movement that opens and closes the valve. Supports DC latching operation for systems that use brief polarity pulses or timed pulses to change valve state without continuous power. Key attributes Functionality: Solenoid coil for irrigation valve actuation, including DC latching capability and multiple AC/DC voltage options. Compatibility: Intended for irrigation solenoid valves that accept coils with the listed voltages (DC Latching, 220VAC, 24VDC, 12VDC, 24VAC(24VDC)). Confirm voltage and coil mounting style on your valve before . Installation: Designed as a direct replacement coil; typical installation requires removing the old coil and placing the replacement over the valve plunger or stem. Power must be turned off before replacement. Performance: Restores electricaltomechanical actuation when matched to the correct voltage and valve type. Use cases Residential sprinkler : a failed coil on a yard sprinkler valve to restore scheduled irrigation without replacing the valve body. Commercial or municipal irrigation maintenance: Keep multiplezone systems operating by stocking replacement coils for common voltages and DC latching needs, minimizing service calls and downtime. Controller upgrade or retrofit: Switch to a controller or power arrangement that uses DC latching or a different supply voltage and install the matching coil to accommodate the change. Installation and compatibility tips Verify the valve's required coil voltage and mounting/interface type before ordering. Always cut power to the system before removing or installing a coil. If using the DC latching option, confirm your controller or power source supports latching pulses and the correct polarity sequence. Note: This product listing refers to an irrigation solenoid valve coil available in the voltages and DC latching form shown: DC Latching, 220VAC, 24VDC, 12VDC, 24VAC(24VDC). Confirm compatibility with your valve model and control system prior to .