Warm Tips: 1: Due to different cutting positions, the display effect of some patterns after sticking is different. Please take the actual sticking as the standard. Mind carefully shoot the pattern model. Shooting means approval. We do not accept returns for the reason that the pattern is not connected. 2: The film design of some models prevents warping. The edge position is specially left with a distance of about 1MM. This is a normal phenomenon and not a mold opening problem. Please be aware of it. Applicable models: Nikon FTZ 2nd generation adapter. Film type: Creative sticker. Film features: Scratch-resistant [FAQ]. Q: Is it easy to use? A: The stickers have been cut and each sticker comes with a tutorial. There are spare stickers for the difficult places to apply on the camera. If you don't apply it well, you can gently peel it off and apply it repeatedly. As long as you have patience, you can easily complete it. Q: What skills are required? A: 1: Before applying the sticker, you need to wipe and clean the body, and there should be no oil and dust. After it is dry, study the corresponding positions of each hole. 2: The correct order for most of the stickers is: start from the top, apply the front and rear holes from large to small, first apply the parts with more holes, then the small areas, and finally the skin position. After the corners and skins are applied, a hair dryer needs to be heated and pressed to make them more adherent Q: Do you need additional tools? A: Each set of stickers comes with a sticker tool kit (wiping cloth, alcohol bag, dust removal stickers, tweezers), and some curved skin corners need to be heated with a hair dryer. Q: Will there be residual glue left after tearing it off? A: After applying the film, a small amount of glue may fall off due to collision, friction, etc. during the use of the camera. This