Set Car rear window conductive defogger wire repair set [jit stock]

31.95 CHF
+ 3.49 CHF Livraison

Set Car rear window conductive defogger wire repair set [jit stock]

  • Marque: Unbranded
Verkocht door:

Set Car rear window conductive defogger wire repair set [jit stock]

  • Marque: Unbranded

31.95 CHF

En stock
+ 3.49 CHF Livraison

Politique de retour sur 14 jours

Verkocht door:

31.95 CHF

En stock
+ 3.49 CHF Livraison

Politique de retour sur 14 jours

Modes de paiement:

Description

Set Car rear window conductive defogger wire repair set [jit stock]

Description: Rear window mirror defogger repair kit is designed to repair scratched or broken rear window defogger grid lines. Surfaces to adhere must be smooth and flat. Repairs can be made ideally at temperatures from 10°C to 24°C. It provides a low-cost, high-quality repair for damaged rear window defogger grids and tabs. Features: *1. Used to repair scratched or broken rear window defogger grid lines. *2. Make permanent, invisible repairs. *3. Fix quickly and easily with a cheap cost. *4. Glue is specially formulated to conduct electricity. *5. Follow the instructions easily by step. Instruction: *Step 1. Determine which grid line is broken and where the repairs need to be made, turn off the rear defogger. Clean the surface of the glass with cloth. *Step2. Carefully place the masking tapes over the broken area of the grid. Make sure to align both ends of the broken line with the masking tapes. Make sure there is a good seal between the window and the masking tapes. Press the masking tapes against the glass and make sure that all air bubbles are removed. *Step 3. Apply the repair compound over the top of the masking tapes with the cotton swabs provided.To avoid solid material remains on the bottom or sides of the bottle, Stir the repair compound with cotton swabs before use. *Step 4. Use a plastic scraper to make the surfaces smooth and flat. Make sure that the repair compound overlaps with both ends of the broken line. Look through the window from the inside, there should be no light showing through the repaired area. If light shows through, apply another coat of repair compound. *Step 5. Remove the masking tapes immediately. *Step 6. After removing the masking tapes, dry the repair compound. Curing within 15-20mins if let dry naturally. (B)Curing within 2-5mins if Dry with a hair drier. *Step 7. Clean the extra repair compound on the glass with alcohol prep-pad. Wait 24 hours before turning on the defogger. Package Includes: 1 x Repair Compound(2ml) 1 x Masking Tapes 1 x Clean Cloth 1 x Cotton Swabs 1 x Alcohol Prep-Pad 1 x Plastic Scraper 1 x Instruction
  • Identifiant Fruugo: 450999634-950846312

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Not suitable for children under 36 months

Livraison & retours

Expédition dans un délai de 2 jours

  • STANDARD: 3.49 CHF - Livraison entre jeu. 08 janvier 2026–ven. 16 janvier 2026

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • TOUYOU05
  • Henan Touyou Trading Co., Ltd.
  • No. 1008, 10th Floor, East Tower, Yubo Building, East 1, Nongye Road,
  • Jinshui District
  • Zhengzhou City
  • CN
  • 450002
  • moxneds@163.com
  • 8613159150717

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • E-CrossStu GmbH
  • E-CrossStu GmbH
  • Mainzer Landstr.69
  • 60329 Frankfurt am Main
  • Hessen
  • DE
  • 60329
  • E-CrossStu@web.de
  • 69332967674