[2 Way Coax Splitter]NEWCARE nickel plated digital coaxial xfinity cable splitter is used to split a single digital signal to up to 2 devices. It works with cable, satellite, high-speed internet or cameras, as well as cable, amplified antennas, amplifiers and other coaxial devices. Compatible with RG59 and RG6 coaxial cables. [Meticulously Made]This coaxial cable junction box is made of nickel-plated zinc press box, which has better weather resistance, rust resistance, stability. The sealed enclosure adds protection against water, and the electronics inside the device withstand an internal pressure of 15 psi. Suitable for indoor, outdoor, wet/dry environments. [Low Signal Loss]The frequency range of this coaxial splitter supports up to 5-2400MHz (2.4GHz), and the internal circuit board has better reliability/durability. Highly shielded construction with low insertion loss, high return loss and isolation for better signal handling from TV, satellite and all other devices. Between 1750 and 2400MHz, the signal loss on each output port is only 4.5db, which improves performance and speed. [Installation steps]①Prepare the coaxial cable and the F-type male head ②Strip the coaxial cable ③Connect the coaxial cable to the F-type male head ④Connect the coaxial cable to the coaxial splitter. To make your satellite connection more balanced and easy, all coaxial ports of the splitter are powered. (Note: Only one maximum voltage is allowed to pass at a time) Colour:silver Material:Nickel-plated zinc Package Contents: 2 x Coaxial cable splitter