Uses high-quality motors, operates efficiently, is powerful and durable. Multi-level temperature adjustment is suitable for various work requirements. Used in electronics, electricians, product packaging heat shrink film, automotive bumper repair, paint removal, drying and thawing, floor tile replacement, bending plastic tubes, heat shrink tube applications, refrigerator defrosting, and clothing factory thread sealing. Housing material: PP+GF30. Working environment temperature: -10°C to 40°C. Rated input voltage: AC 220V / AC 110V. Rated frequency: 50Hz / 60Hz. Maximum power consumption: 300W. Operating power range: 150W–300W. Standby power consumption: ≤2W. Air volume: 200–450 L/min. Output temperature range: 230°C–380°C. Maximum air outlet temperature: 330°C–350°C (measured at a distance from the outlet). Minimum air outlet temperature: 230°C–280°C (measured at a distance from the outlet). Noise level: ≤76 dBA (measured at 30 cm from air outlet). Control interface: On/off switch and temperature adjustment. Switch operation: Gear switch on handle. “O” = off; “I” = low-temperature, low-airflow mode (non-adjustable); “II” = high-temperature, high-airflow mode (non-adjustable). Two temperature settings: half-open and fully open. Plug types available: US plug (compatible with Canada, India, Mexico, Thailand, Taiwan, USA, Philippines); EU plug (compatible with Indonesia, Germany, France, Spain, Italy). Voltage: AC 220V / AC 110V. Color: As shown in image. Material: Plastic. Package contents: 1 x Heat Air Tool. Note: Color appearance may vary slightly due to lighting and screen settings. Measurement tolerance: ±1–3 cm.