Complies with IEEE 802.3af Power over Ethernet (10/100 Mbps supported) Extends PoE range by an additional 100 meters Automatically detects and protects connected PoE devices from incorrect installation Plug-and-play operation—no configuration required 3-port PoE extender delivers both data and power to one terminal device via Cat5, Cat5e, Cat6, or UTP cable Features three 10/100 Mbps LAN ports: one for PoE input, two for PoE output Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, and IEEE 802.3af/at PoE standards Designed for use with wireless access points, IP cameras, IP phones, and other network devices where AC power is unavailable or distant Suitable for deployment in hotels, schools, office buildings, and residential areas PoE input power: up to 30W PoE output power: up to 24W per port (average 8W per port) PoE power sourcing: pins 1/2+ and 3/6− (Mode A) PoE power delivery: pins 1/2+ and 3/6− (Mode A) Compatible with Category 5 or higher unshielded twisted-pair cabling for 10/100/1000BASE-TX MAC address table capacity: 2,000 entries Packet buffer memory: 48 bytes Switching capacity: 1.0 Gbps Network protocols supported: IEEE 802.3i (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3x (flow control), IEEE 802.3af (PoE) Operating temperature: -10°C to 55°C Operating humidity: 10%–90%, non-condensing Color: White Material: Plastic Package includes: 1 x PoE Extender Note: Color appearance may vary slightly due to lighting and display settings. Measurement tolerance: ±1–3 cm.