[Compact XLR Soldering Plug] Gold-plated 3-pin XLR microphone cable plug adapter. Half the size of a standard XLR plug—compact and ideal for tight spaces. [Repair/DIY XLR Cable] Compact 3-pin XLR adjustable right-angle audio solder plug. Ideal for quick repairs or building custom microphone XLR cables. [Thin XLR Cable Connector] Compact XLR microphone solder connector. Compatible with thin XLR/microphone cables up to 5 mm (0.19 in) in diameter. [Angle Adjustable] 90-degree right-angle XLR microphone solder audio plug. Loosen the set screw to adjust the cable direction to your preferred angle. This plug features a side-outlet design. After assembly, fine angular adjustments can be made by rotating the tail section. Well-suited for devices with limited rear socket space. The tail rubber sleeve has a 3 mm outer diameter, fitting wires from 3.0–5.0 mm. When the sleeve is removed, the diameter is 7 mm, accommodating wires from 5.0–6.5 mm. Product Use: Suitable for assembling XLR microphone cables, DMX cables, and other audio cables. Requires soldering during installation. Installation Precautions: Due to the side-outlet design, hold the tail plastic part and rotate it counterclockwise to remove the tail cover before tightening the plastic back shell. After tightening the shell, set the desired angle and press the tail cover firmly into place. Always remove the tail cover first, adjust as needed, then tighten the shell. Installing without removing the tail cover may cause wire twisting or solder joint failure. Specifications: Male / Female Material: Zinc alloy + copper with gold plating + plastic Color: Black + silver Package Contents: 2 × XLR Soldering Plugs Note: Lighting conditions and screen settings may cause slight color variation.