[Compact XLR Soldering Plug] Gold-plated 3-pin XLR microphone cable plug adapter. Half the size of a standard XLR plug—compact and ideal for tight spaces. [Repair/DIY XLR Cable] Compact 3-pin XLR adjustable right-angle audio solder plug. Designed for quick repairs or custom microphone cable builds. [Thin XLR Cable Connector] Compact XLR microphone solder connector. Compatible with thin XLR/microphone cables up to 5 mm (0.19 in) in diameter. [Angle Adjustable] 90-degree right-angle XLR microphone solder audio plug. Loosen the set screw to adjust the cable exit angle as needed. This plug features a side-exit design. After assembly, fine angular adjustments can be made by rotating the tail section. Ideal for devices with limited rear socket clearance. The tail rubber sleeve has a 3 mm outer diameter, fitting wires from 3.0–5.0 mm. When the sleeve is removed, the tail diameter is 7 mm, accommodating wires from 5.0–6.5 mm. Product Use: Suitable for building XLR microphone cables, DMX cables, and other audio cables. Requires soldering for assembly. Installation Precautions: Due to the side-exit design, hold the tail plastic section and rotate it counterclockwise to remove the tail cover before tightening the rear plastic shell. After tightening the shell, set the desired angle and press the tail cover firmly into place. Always remove the tail cover first, make adjustments, then tighten the shell. Tightening the shell without first removing the tail cover may cause wire twisting or solder joint failure. Specifications: Gender: Male / Female Material: Zinc alloy + copper with gold plating + plastic Color: Black + silver Package Contents: 2 × XLR Soldering Plugs Note: Other items shown are not included. Color may vary slightly due to lighting and screen settings.