40x LED 0805 0402 1206 0603 SMD with cable micro strand 30cm soldered miniature Description: Perfect for small models. Soldering SMDs can be very difficult, so these pre-soldered SMDs are a great relief for modellers. SMDs already soldered with enamelled copper wire. Available types: 0402, 0603, 0805, 1206 Colours: Cold white, warm white, blue, red Flashing: Frequency 1.5 Hz (within approx. 0.75 seconds) Colour of the enamelled wire: red = positive, black = negative Diameter of the enamelled wire: 0.15 mm Length of the enamelled wire: approx. 300 mm SMD beam angle: approx. 120°. Operating voltage: 1.2V - 3V, AC or DC compatible Forward current (continuous / max): 15mA / 20mA Applications. Industrial electronics, model ships, model aeroplanes, remote-controlled cars/automobiles, model building in or on buildings, figures, amusement rides, etc. Suitable for track gauges: H0, TT, N, Z, G, 1, 0 For maximum miniaturisation, a magnetic cable (copper) with a diameter of only 0.15 mm (cross-sectional area of 0.008 mm²) is used, which is crystal clear and highly flexible, but still covered with a clear lacquered electrical insulation layer. Dimensions (L x W x H): Type 0402. 1.00 x 0.50 x 0.50 mm Type 0603: 1.60 x 0.80 x 0.40 mm Type 0805: 2.00 x 1.25 x 1.10 mm Type 1206: 3.20 x 1.60 x 1.10 mm Delivery programme: Depending on colour and quantity, 40 SMD, enamelled copper wire with solder insulation Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store