Can be used to disassemble LED light beads and FPC boards, and for BGA solder ball rework. PTC heating plate: Constructed with a PTC heating plate and heat-dissipating aluminum sheet. Reaches approximately 250°C (±10°C) in 30 seconds; no thermostat required. High performance: The PTC heating plate is made of high-quality aluminum and PTC materials, delivering high efficiency and power. Heating characteristics: Supports double-sided heating and dry-burn functionality. Designed to operate safely below ignition temperatures. Paper, wood, or porcelain can provide effective thermal insulation. Current: Less than 5A Maximum power: 600W Constant temperature power: Less than 60W Set temperature: 260°C ±10% Heating time: Approximately 20 seconds for bare board Heating element: PTC polymer preferred Housing material: Frosted stretched aluminum profile Safety rating: IP20 insulation Product dimensions: 121 mm × 70 mm Color: As shown Material: Aluminum Plug type: EU plug Voltage: AC 220V Note: Installation guide not included. Professional installation is recommended. Slight color or dimensional variations may occur due to lighting, screen settings, or manufacturing tolerances. These do not affect functionality. Package contents: 1 × LED remover split plate Note: Lighting conditions and display settings may cause slight color differences between the image and the actual product. Dimensional tolerance: ±1–3 cm.