The Y2 12V to 15V 5A boost module is a DCDC stepup converter that takes a 12V input and delivers a 15V output with a maximum current of 5A. It provides a compact, boardlevel solution for obtaining a 15V rail from a 12V source in a wide range of projects and systems. Key benefits Enables 15V operation from a 12V source, increasing the number of devices and modules that can be powered from a single supply. Compact boardform factor for easy integration into enclosures, assemblies, or PCB layouts. Suitable for rapid prototyping and projects that require a 15V rail without multiple separate power supplies. Maximum output power up to 75W (15V x 5A), allowing highercurrent loads within the rated limits. Designed for reliable performance in DC power applications needing a 12V to 15V boost. Key attributes Functionality: 12V input to 15V output boost converter with a 5A maximum current. Compatibility: Intended for loads that require 15V from a 12V source; ensure the input supply can deliver sufficient current and that the load stays within the 5A limit. Size: Compact boardform factor suitable for embedding in equipment and development projects. Material: Standard PCBbased construction suitable for integration into various assemblies. Performance: Delivers up to 75W output under rated conditions; realworld results depend on input source capability, load, and thermal conditions. Applications and use cases Power a 15V peripheral from a 12V battery or supply in mobile or embedded systems. Provide a 15V DC rail for development boards or motor controllers that require 15V, sourced from a 12V supply. Supply 15V input for lab instrumentation or test rigs that expect 15V, using a 12V bench supply as the source. Notes Heat and electrical loading affect performance; ensure adequate cooling and do not exceed the 5A rating. Verify polarity and connect to a 12V source capable of delivering the required current for your load.